Piezoelectric Energy Harvesting & Resonance Evaluation Board
BreadhateR·embedded-systems-portfolio·Kicad_Files/Harvester_Piezo_WithMeasurements__DevBoard/Harvester_Piezo_WithMeasurements_DevBoard.kicad_pcb
About the Piezoelectric Energy Harvesting & Resonance Evaluation Board
Piezoelectric Energy Harvesting & Resonance Evaluation Board is an open source Nordic nRF PCB design by BreadhateR, published on GitHub. It is a 4-layer board measuring 82.7 × 70.5 mm, with 72 components from 43 distinct parts.
Its main chip is the CES-114-02-T-S, from the Nordic nRF family. Other key parts include the AEM30300-QFN and INA190A4IRSWR. By type, the board carries 18 connectors, 17 jumpers, 15 resistors, 9 capacitors, 5 diodes and 3 transistors.
It belongs with the dev boards & breakouts, test & measurement and iot & wireless designs in this gallery.
From the project
Development platform for commissioning ultrasonic harvesting, comparing storage architectures, and evaluating excitation frequencies in the SiSmaK project at TU Darmstadt.
Development platform for commissioning ultrasonic harvesting, comparing storage architectures, and evaluating excitation frequencies in the SiSmaK project at TU Darmstadt.
This board makes the compact harvesting and measurement circuit accessible through configuration jumpers, switches, headers, and test points. Development focused on isolating circuit functions for commissioning, adjusting the AEM30300 operating point, and measuring the rectifier's voltage/current response during frequency sweeps.

Main components on the Piezoelectric Energy Harvesting & Resonance Evaluation Board
Piezoelectric Energy Harvesting & Resonance Evaluation Board bill of materials (BOM)
72 components, 43 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | AEM30300-QFN | AEM30300 | IC1 |
| 1 | INA190A4IRSWR | QFN40P140X180X55-10N | IC2 |
| 1 | DMN2310UTQ-7 NMOS | SOT-523 | Q1 |
| 1 | SI2323DDS-T1-BE3 | SOT95P237X112-3N | Q3 |
| 1 | DMG3402L-7 | SOT96P240X115-3N | Q4 |
| 1 | FH34SRJ-7S-0.5SH(50) FH34SRJ-7S-0.5SH_50_ | FH34SRJ7S05SH50 | J1 |
| 2 | CONMHF4-SMD-G-T | CONMHF4-SMD-G-T | J2, J14 |
| 1 | 1729128 Conn_01x02 | CONN_1729128_PXC | J3 |
| 1 | CES-114-02-T-S Conn_01x07_Pin | PinHeader_1x07_P2.54mm_Vertical | J4 |
| 1 | PH1RB-03-UA Conn_01x03 | PinHeader_1x03_P2.54mm_Horizontal | J5 |
| 11 | TSW-101-07-G-S Conn_01x01 | PinHeader_1x01_P2.54mm_Vertical | J6, J7, J8, J9, J11, J12, J13, J15 +3 |
| 1 | Conn_01x07_Pin | PinHeader_1x07_P2.54mm_Vertical | J10 |
| 10 | SSK01-MPH-254-A2 Jumper_2_Bridged | Header_1x2_Jumper | JP1, JP4, JP7, JP8, JP9, JP13, JP14, JP16 +2 |
| 1 | SSK01-MPH-254-A2 Jumper_2_Open | Header_1x2_Jumper | JP2 |
| 5 | SSK01-MPH-254-A2 Jumper_2_Open | PinHeader_1x02_P2.54mm_Vertical | JP6, JP10, JP11, JP12, JP20 |
| 1 | SSK01-MPH-254-A2 Jumper_2_Bridged | PinHeader_1x02_P2.54mm_Vertical | JP25 |
| 1 | TS02-66-43-BK-160-LCR-D Button_Entladen | SW_TS02-66-43-BK-160-LCR-D | S1 |
| 1 | EG6201 | EG6201 | S2 |
| 1 | MM5Z5V6T1G D_Zener | SODFL1608X70N | D1 |
| 1 | MM5Z5V1T1G D_Zener | SODFL1608X70N | D2 |
Show 23 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | RB751S40T1G | Diode_RB751S40T1G | D3, D4 |
| 1 | CES-114-02-T-S XIAO_nrf54l15 | XIAO-nRF54l15-Steckleisten_Female | D5 |
| 1 | DFE252010F-100M=P2 10uH | DFE252010F-100M=P2 | L1 |
| 1 | GRM155R60J106ME15D 10uF | C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C1 |
| 1 | GRM188R61A226ME15D 22uF | C_0603_1608Metric | C2 |
| 1 | GRMJN65C1H104JE01J 100nF | 0704 | C3 |
| 3 | GRM1555CYA103GE01J 10nF | C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C4, C8, C9 |
| 1 | MLASL168BB5226MTNA01 22uF | C_0603_1608Metric | C5 |
| 1 | CGA2B2X5R1C104M050BA 0.1uF | C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C6 |
| 1 | T490B157M010ATE500 150uF | T490B | C7 |
| 1 | CSRT1206FT10R0 10 | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R1 |
| 1 | RT0402BRE0730RL 30 | R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R2 |
| 2 | RNCF0402BTE1K00 1K | R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R3, R4 |
| 1 | RC0402FR-07475KL 475k | R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R5 |
| 1 | RC0402FR-076M49L 6,49Meg | R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R6 |
| 1 | 560112110243 45,3k | R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R7 |
| 1 | CRCW04023M01FKED 3,01Meg | R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R8 |
| 1 | CRCW04022M00FKEDC 2Meg | R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R9 |
| 1 | RK73B2ATTE104J 100k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R10 |
| 2 | RC0402FR-071MP 1M | R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R15, R19 |
| 1 | RC0402FR-076M8L 6.8M | R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R16 |
| 1 | CRCW04023M30FKEDC 3.3M | R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R17 |
| 1 | ~ | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R18 |
Piezoelectric Energy Harvesting & Resonance Evaluation Board design files
The KiCad project lives in the BreadhateR/embedded-systems-portfolio repository on GitHub; these links point at the commit this page was built from.
- LayoutKicad_Files/Harvester_Piezo_WithMeasurements__DevBoard/Harvester_Piezo_WithMeasurements_DevBoard.kicad_pcb
- SchematicKicad_Files/Harvester_Piezo_WithMeasurements__DevBoard/Harvester_Piezo_WithMeasurements_DevBoard.kicad_sch
- BOMKicad_Files/Harvester_Piezo_WithMeasurements/bom/Harvester_Piezo_WithMeasurments.csv
Piezoelectric Energy Harvesting & Resonance Evaluation Board: common questions
What microcontroller does the Piezoelectric Energy Harvesting & Resonance Evaluation Board use?
The Piezoelectric Energy Harvesting & Resonance Evaluation Board is built around the CES-114-02-T-S, from the Nordic nRF family.
How big is the Piezoelectric Energy Harvesting & Resonance Evaluation Board?
The Piezoelectric Energy Harvesting & Resonance Evaluation Board measures 82.7 × 70.5 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the Piezoelectric Energy Harvesting & Resonance Evaluation Board?
72 components, from 43 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Piezoelectric Energy Harvesting & Resonance Evaluation Board design files?
From the BreadhateR/embedded-systems-portfolio repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Piezoelectric Energy Harvesting & Resonance Evaluation Board design in my own project?
The repository has no license, so all rights stay with BreadhateR. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Piezoelectric Energy Harvesting & Resonance Evaluation Board without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug Nordic nRF firmware against it before you order a PCB.
More boards in embedded-systems-portfolio
Nordic nRF
NRF54L15 Custom Development Board
BreadhateR
63.1 × 43.5 mm43 parts4LNo license0SiSmaK Piezoelectric Resonance Measurement Board
BreadhateR
13 × 13 mm35 parts4LNo license0SiSmaK Piezoelectric Energy Harvesting – Capacitor
BreadhateR
13 × 13 mm21 parts4LNo license0SiSmaK Solar Energy Harvesting – Capacitor
BreadhateR
13 × 13 mm19 parts4LNo license0SiSmaK NFC Energy Harvesting Board
BreadhateR
13 × 13 mm15 parts4LNo license0SiSmaK Piezoelectric Energy Harvesting – Battery
BreadhateR
13 × 13 mm13 parts4LNo license0SiSmaK Solar Energy Harvesting – Battery
BreadhateR
13 × 13 mm9 parts4LNo license0
Similar boards
Nordic nRF
Keyboard
byrantech
262.5 × 109.6 mm206 parts2LMIT4.3kNordic nRF
TOTEM
GEIGEIGEIST
258.8 × 94.4 mm85 parts2LCERN-OHL-P-2.02.0kNordic nRF
Pixl.js
solosky
40 × 23 mm45 parts4LGPL-2.01.4kNordic nRF
Management
dennisss
101 × 31.5 mm50 parts2LApache-2.0381Nordic nRF
Board
dennisss
363 × 128 mm420 parts4LApache-2.0381Nordic nRF
Board hl15-latest
dennisss
61 × 37 mm14 parts2LApache-2.0381