SiSmaK Solar Energy Harvesting – Capacitor

BreadhateR·embedded-systems-portfolio·Kicad_Files/Harvester_Solar_Kondensator/Harvester_Solar_Kondensator.kicad_pcb

SiSmaK Solar Energy Harvesting – Capacitor PCB layout, top view — open source board by BreadhateR

About the SiSmaK Solar Energy Harvesting – Capacitor PCB

SiSmaK Solar Energy Harvesting – Capacitor is an open source PCB design by BreadhateR, published on GitHub. It is a 4-layer board measuring 13 × 13 mm, with 19 components from 16 distinct parts.

Other key parts include the AEM10300-QFN. By type, the board carries 10 resistors, 3 capacitors, 2 transistors, 2 connectors, 1 IC and 1 inductor.

It belongs with the power & battery designs in this gallery.

From the project

Photovoltaic power-supply design for the existing SiSmaK sensor-integrated M20 bolt. The circular PCB connects through an FPC interface and accumulates energy in a capacitor before enabling the load. It addresses the repeated startup attempts observed when the battery-buffered su

Photovoltaic power-supply design for the existing SiSmaK sensor-integrated M20 bolt. The circular PCB connects through an FPC interface and accumulates energy in a capacitor before enabling the load. It addresses the repeated startup attempts observed when the battery-buffered supply could not meet MCU boot demand.

Development covered storage sizing, AEM10300 configuration, a transistor output gate, and PCB layout within the approximately 13 mm installation envelope.

SiSmaK Solar Energy Harvesting – Capacitor, from the project README
From the project README

Main components on the SiSmaK Solar Energy Harvesting – Capacitor

AEM10300-QFN

SiSmaK Solar Energy Harvesting – Capacitor bill of materials (BOM)

19 components, 16 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
AEM10300-QFN
IC1
1
CSD25485F5
PMOS_CSD25485F5
Q1
1
CSD17585F5
NMOS_CSD17585F5
Q2
1
FH34SRJ-7S-0.5SH(50)
FH34SRJ-7S-0.5SH_50_
J1
1
CONMHF4-SMD-G-T
J2
1
DFE252010F-100M=P2
10uH
L1
1
GRM155R60J106ME15D
10uF
C1
1
GRM188R61A226ME15D
22uF
C2
1
T490B157M010ATE500
150uF
C5
1
560112110243
45,3k
R2
1
CRCW04023M01FKED
3,01Meg
R4
4
RC0201JR-130RL
0
R7, R8, R9, R10
1
CRCW04022M00FKEDC
2Meg
R11
1
CRCW04024M99FKED
4.99Meg
R12
1
RC0402FR-07475KL
475k
R13
1
RC0402FR-076M49L
6,49Meg
R14

SiSmaK Solar Energy Harvesting – Capacitor design files

The KiCad project lives in the BreadhateR/embedded-systems-portfolio repository on GitHub; these links point at the commit this page was built from.

SiSmaK Solar Energy Harvesting – Capacitor: common questions

How big is the SiSmaK Solar Energy Harvesting – Capacitor PCB?

The SiSmaK Solar Energy Harvesting – Capacitor measures 13 × 13 mm, has 4 copper layers and is 1.6 mm thick.

How many components are on the SiSmaK Solar Energy Harvesting – Capacitor?

19 components, from 16 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the SiSmaK Solar Energy Harvesting – Capacitor design files?

From the BreadhateR/embedded-systems-portfolio repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the SiSmaK Solar Energy Harvesting – Capacitor design in my own project?

The repository has no license, so all rights stay with BreadhateR. Use it as a reference, and ask the author before reusing the design.

More boards in embedded-systems-portfolio

Similar boards