SiSmaK Piezoelectric Resonance Measurement Board

BreadhateR·embedded-systems-portfolio·Kicad_Files/Harvester_Piezo_WithMeasurements/Harvester_Piezo_WithMeasurements.kicad_pcb

SiSmaK Piezoelectric Resonance Measurement Board layout, top view — open source board by BreadhateR

About the SiSmaK Piezoelectric Resonance Measurement Board

SiSmaK Piezoelectric Resonance Measurement Board is an open source PCB design by BreadhateR, published on GitHub. It is a 4-layer board measuring 13 × 13 mm, with 35 components from 21 distinct parts.

Other key parts include the AEM30300-QFN and INA190A4IRSWR. By type, the board carries 18 resistors, 7 capacitors, 3 diodes, 2 ICs, 2 connectors and 1 transistor.

It belongs with the test & measurement designs in this gallery.

From the project

Compact harvesting and measurement PCB developed for the SiSmaK research project at TU Darmstadt. It investigates how frequency-search electronics can fit within the approximately 13 mm installation envelope of the sensor-integrated M20 bolt.

Compact harvesting and measurement PCB developed for the SiSmaK research project at TU Darmstadt. It investigates how frequency-search electronics can fit within the approximately 13 mm installation envelope of the sensor-integrated M20 bolt.

The board combines AEM30300 harvesting with switchable measurement paths at the DC output of the Greinacher rectifier. Measuring open-circuit voltage and approximate short-circuit current at different excitation frequencies supports ranking of useful ultrasonic operating points without a full load sweep at every frequency.

SiSmaK Piezoelectric Resonance Measurement Board, from the project README
From the project README

Main components on the SiSmaK Piezoelectric Resonance Measurement Board

AEM30300-QFNINA190A4IRSWR

SiSmaK Piezoelectric Resonance Measurement Board bill of materials (BOM)

35 components, 21 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
AEM30300-QFN
IC1
1
INA190A4IRSWR
IC2
1
DMN2310UTQ-7
NMOS
Q1
1
FH34SRJ-7S-0.5SH(50)
FH34SRJ-7S-0.5SH_50_
J1
1
CONMHF4-SMD-G-T
J2
1
RC0201JR-130RL
0
Rw1
1
MM5Z5V6T1G
D_Zener
D1
2
RB751S40T1G
D3, D4
1
DFE252010F-100M=P2
10uH
L1
1
GRM155R60J106ME15D
10uF
C1
1
GRM188R61A226ME15D
22uF
C2
1
GRMJN65C1H104JE01J
100nF
C3
2
GRM1555CYA103GE01J
10nF
C4, C8
1
MLASL168BB5226MTNA01
22uF
C5
1
CGA2B2X5R1C104M050BA
0.1uF
C6
11
RC0201JR-130RL
0
R1, R5, R6, R7, R8, R9, R10, R11 +3
1
RT0402BRE0730RL
30
R2
2
RNCF0402BTE1K00
1K
R3, R4
2
RC0402FR-071MP
1M
R15, R19
1
RC0402FR-076M8L
6.8M
R16
Show 1 more
QtyPartRefs
1
CRCW04023M30FKEDC
3.3M
R17

SiSmaK Piezoelectric Resonance Measurement Board design files

The KiCad project lives in the BreadhateR/embedded-systems-portfolio repository on GitHub; these links point at the commit this page was built from.

SiSmaK Piezoelectric Resonance Measurement Board: common questions

How big is the SiSmaK Piezoelectric Resonance Measurement Board?

The SiSmaK Piezoelectric Resonance Measurement Board measures 13 × 13 mm, has 4 copper layers and is 1.6 mm thick.

How many components are on the SiSmaK Piezoelectric Resonance Measurement Board?

35 components, from 21 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the SiSmaK Piezoelectric Resonance Measurement Board design files?

From the BreadhateR/embedded-systems-portfolio repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the SiSmaK Piezoelectric Resonance Measurement Board design in my own project?

The repository has no license, so all rights stay with BreadhateR. Use it as a reference, and ask the author before reusing the design.

More boards in embedded-systems-portfolio

Similar boards