NRF54L15 Custom Development Board
BreadhateR·embedded-systems-portfolio·Kicad_Files/MCU_Board/MCU_Board.kicad_pcb
About the NRF54L15 Custom Development Board
NRF54L15 Custom Development Board is an open source Nordic nRF PCB design by BreadhateR, published on GitHub. It is a 4-layer board measuring 63.1 × 43.5 mm, with 43 components from 30 distinct parts.
Its main chip is the NRF54L10-QFAA-R, from the Nordic nRF family. By type, the board carries 14 capacitors, 12 connectors, 5 inductors, 4 resistors, 2 switches and 2 diodes.
It belongs with the dev boards & breakouts designs in this gallery.
From the project
Custom Nordic MCU development-board design for firmware prototyping, peripheral access, and debugging. The supplied schematic and PCB specify NRF54L15-QFAA-R;
Custom Nordic MCU development-board design for firmware prototyping, peripheral access, and debugging. The supplied schematic and PCB specify NRF54L15-QFAA-R;
Development covered the MCU support circuit, supply filtering and decoupling, clock components, RF network, schematic capture, and PCB layout. This is a separate board design; it is not the existing flexible SiSmaK electronics.

Main components on the NRF54L15 Custom Development Board
NRF54L15 Custom Development Board bill of materials (BOM)
43 components, 30 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | NRF54L10-QFAA-R | QFN40P600X600X90-49N | IC1 |
| 1 | SC16S-7PF20PPM | SC16S7PF20PPM | Y2 |
| 1 | FH34SRJ-7S-0.5SH_50_ Conn_01x05 | PinHeader_1x05_P2.54mm_Vertical | J1 |
| 1 | CONMHF4-SMD-G-T Conn_01x06 | PinHeader_1x06_P2.54mm_Vertical | J2 |
| 1 | Conn_01x07 | PinHeader_1x07_P2.54mm_Vertical | J3 |
| 1 | Conn_01x05 | JST_XH_B5B-XH-A_1x05_P2.50mm_Vertical | J4 |
| 1 | Conn_01x11 | PinHeader_1x11_P2.54mm_Vertical | J5 |
| 1 | Conn_01x05 | PinHeader_1x05_P2.54mm_Vertical | J6 |
| 1 | Conn_01x02 | TerminalBlock_MetzConnect_Type059_RT06302HBWC_1x02_P3.50mm_Horizontal | J7 |
| 1 | Conn_01x02 | PinHeader_1x02_P2.54mm_Vertical | J8 |
| 2 | Conn_01x01 | PinHeader_1x01_P2.54mm_Vertical | J9, J10 |
| 2 | Conn_01x01 | PinHeader_1x01_P2.54mm_Horizontal | J11, J12 |
| 1 | ACAG0201-2450-T | ANTC2012X70N | ANT1 |
| 1 | ECS-320-CDX-2374 Crystall_main | ECS-320-CDX-2374 | Osc1 |
| 2 | SWT0315-065025GSA SWT0315-065025GSA_REVA | SW_SWT0315-065025GSA_REVA | S1, S2 |
| 1 | APT1608CGCK LED_GREEN | LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D1 |
| 1 | VFHR1111C-3BY2A-TR LED_RED | LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D2 |
| 1 | 2506031217H0 FerriteBead_Small | L_0603_1608Metric_Pad1.05x0.95mm_HandSolder | FB2 |
| 2 | MHQ1005075HA3N5BTD25 3,5n | L_0402_1005Metric | L3, L12 |
| 1 | L06032R7BGWTR 2,7n | L_0603_1608Metric_Pad1.05x0.95mm_HandSolder | L6 |
Show 10 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ASMCI-0603-4R7M-T 4,7µ | L_0603_1608Metric_Pad1.05x0.95mm_HandSolder | L8 |
| 6 | CC0603KRX7R7BB104 100n | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1, C14, C17, C23, C41, C42 |
| 1 | C0603C103K9RACTU 10n | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C2 |
| 2 | CGA3E1X7R0J225K080AC 2,2µ | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C10, C25 |
| 1 | CC0603KRX7R7BB222 2,2n | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C12 |
| 1 | RF18N2R0A500CT 2pF | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C15 |
| 1 | RF18N0R3B500CT 0,3pF | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C16 |
| 1 | CL10A106KQ8NNNC 10µ | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C22 |
| 1 | RF18N1R5A500CT 1,5pF | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C29 |
| 4 | RMCF0603FT1K00 1k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R2, R3, R8 |
NRF54L15 Custom Development Board design files
The KiCad project lives in the BreadhateR/embedded-systems-portfolio repository on GitHub; these links point at the commit this page was built from.
NRF54L15 Custom Development Board: common questions
What microcontroller does the NRF54L15 Custom Development Board use?
The NRF54L15 Custom Development Board is built around the NRF54L10-QFAA-R, from the Nordic nRF family.
How big is the NRF54L15 Custom Development Board?
The NRF54L15 Custom Development Board measures 63.1 × 43.5 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the NRF54L15 Custom Development Board?
43 components, from 30 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the NRF54L15 Custom Development Board design files?
From the BreadhateR/embedded-systems-portfolio repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the NRF54L15 Custom Development Board design in my own project?
The repository has no license, so all rights stay with BreadhateR. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the NRF54L15 Custom Development Board without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug Nordic nRF firmware against it before you order a PCB.
More boards in embedded-systems-portfolio
Nordic nRF
Piezoelectric Energy Harvesting & Resonance Evaluation Board
BreadhateR
82.7 × 70.5 mm72 parts4LNo license0SiSmaK Piezoelectric Resonance Measurement Board
BreadhateR
13 × 13 mm35 parts4LNo license0SiSmaK Piezoelectric Energy Harvesting – Capacitor
BreadhateR
13 × 13 mm21 parts4LNo license0SiSmaK Solar Energy Harvesting – Capacitor
BreadhateR
13 × 13 mm19 parts4LNo license0SiSmaK NFC Energy Harvesting Board
BreadhateR
13 × 13 mm15 parts4LNo license0SiSmaK Piezoelectric Energy Harvesting – Battery
BreadhateR
13 × 13 mm13 parts4LNo license0SiSmaK Solar Energy Harvesting – Battery
BreadhateR
13 × 13 mm9 parts4LNo license0
Similar boards
Nordic nRF
Keyboard
byrantech
262.5 × 109.6 mm206 parts2LMIT4.3kNordic nRF
TOTEM
GEIGEIGEIST
258.8 × 94.4 mm85 parts2LCERN-OHL-P-2.02.0kNordic nRF
Pixl.js
solosky
40 × 23 mm45 parts4LGPL-2.01.4kNordic nRF
Board hl15-latest
dennisss
61 × 37 mm14 parts2LApache-2.0381Nordic nRF
Management
dennisss
101 × 31.5 mm50 parts2LApache-2.0381Nordic nRF
Board
dennisss
363 × 128 mm420 parts4LApache-2.0381