SiSmaK Piezoelectric Energy Harvesting – Battery

BreadhateR·embedded-systems-portfolio·Kicad_Files/Harvester_Piezo_Akku/Harvester_Piezo_Akku.kicad_pcb

SiSmaK Piezoelectric Energy Harvesting – Battery PCB layout, top view — open source board by BreadhateR

About the SiSmaK Piezoelectric Energy Harvesting – Battery PCB

SiSmaK Piezoelectric Energy Harvesting – Battery is an open source PCB design by BreadhateR, published on GitHub. It is a 4-layer board measuring 13 × 13 mm, with 13 components from 10 distinct parts.

Other key parts include the AEM30300-QFN. By type, the board carries 4 diodes, 4 capacitors, 2 connectors, 1 IC, 1 inductor and 1 resistor.

It belongs with the power & battery designs in this gallery.

From the project

Ultrasonic power-receiver module developed for the existing SiSmaK sensor-integrated M20 bolt. A piezoelectric receiver converts externally generated ultrasound transmitted through a metallic structure into electrical energy. The circular PCB rectifies and manages this energy, co

Ultrasonic power-receiver module developed for the existing SiSmaK sensor-integrated M20 bolt. A piezoelectric receiver converts externally generated ultrasound transmitted through a metallic structure into electrical energy. The circular PCB rectifies and manages this energy, connecting through an FPC interface to the existing electronics and rechargeable cell.

SiSmaK Piezoelectric Energy Harvesting – Battery, from the project README
From the project README

Main components on the SiSmaK Piezoelectric Energy Harvesting – Battery

AEM30300-QFN

SiSmaK Piezoelectric Energy Harvesting – Battery bill of materials (BOM)

13 components, 10 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
AEM30300-QFN
IC1
1
FH34SRJ-7S-0.5SH(50)
FH34SRJ-7S-0.5SH_50_
J1
1
CONMHF4-SMD-G-T
J2
4
RB751S40T1G
D1, D2, D3, D4
1
DFE252010F-100M=P2
10uH
L1
1
GRM155R60J106ME15D
10uF
C1
1
GRM188R61A226ME15D
22uF
C2
1
GRMJN65C1H104JE01J
100nF
C3
1
MLASL168BB5226MTNA01
22uF
C5
1
RC0201JR-130RL
ZMPP
R1

SiSmaK Piezoelectric Energy Harvesting – Battery design files

The KiCad project lives in the BreadhateR/embedded-systems-portfolio repository on GitHub; these links point at the commit this page was built from.

SiSmaK Piezoelectric Energy Harvesting – Battery: common questions

How big is the SiSmaK Piezoelectric Energy Harvesting – Battery PCB?

The SiSmaK Piezoelectric Energy Harvesting – Battery measures 13 × 13 mm, has 4 copper layers and is 1.6 mm thick.

How many components are on the SiSmaK Piezoelectric Energy Harvesting – Battery?

13 components, from 10 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the SiSmaK Piezoelectric Energy Harvesting – Battery design files?

From the BreadhateR/embedded-systems-portfolio repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the SiSmaK Piezoelectric Energy Harvesting – Battery design in my own project?

The repository has no license, so all rights stay with BreadhateR. Use it as a reference, and ask the author before reusing the design.

More boards in embedded-systems-portfolio

Similar boards