Pen mixer

Brillar0101·pen-mixer·production/kicad/pen-mixer.kicad_pcb

Pen mixer PCB layout, top view — open source board by Brillar0101

About the Pen mixer PCB

Pen mixer is an open source PCB design by Brillar0101, published on GitHub under the MIT license. It is a 4-layer board measuring 38 × 36.2 mm, with 32 components from 22 distinct parts.

Other key parts include the ISP1807-LR-RS, LSM6DS3TR-C, MCP73831T-2ACI/OT and TPS7A0533PDBVR. By type, the board carries 10 capacitors, 8 resistors, 4 ICs, 4 test points, 2 connectors and 2 LEDs.

It belongs with the audio, rf & radio and iot & wireless designs in this gallery.

From the project

Pen-mounted motion controller: prototype and production firmware, laptop audio stack, and the production PCB as a KiCad project

Pen Mixer is a small motion controller that clips onto the top of an ordinary pen and turns handwriting gestures into live audio control. An IMU on the board reads tilt and twist, an nRF52840 sends the motion to a laptop over Bluetooth, and the laptop shapes whatever track is playing: tilt the pen and a filter sweeps, twist it and the level moves. The better your pen control gets, the better your mix sounds.

Pen mixer, from the project README
From the project README

Main components on the Pen mixer

Pen mixer bill of materials (BOM)

32 components, 22 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
ISP1807-LR-RS
ISP1807-LR
Insight SiP
U1
1
LSM6DS3TR-C
STMicroelectronics
U2
1
MCP73831T-2ACI/OT
Microchip
U3
1
TPS7A0533PDBVR
TPS7A0533PDBV
Texas Instruments
U4
1
GT-USB-7010ASV
USB-C 16P
G-Switch
J1
1
BAT
J2
1
EVQP7C01P
PANASONIC
SW1
1
SWDIO
TP1
1
SWDCLK
TP2
1
GND
TP4
1
+3V3
TP5
2
XL-1010RGBC-2812B
XL-1010RGBC
XINGLIGHT
LED1, LED2
1
NCD0402G1
GRN
Foshan NationStar
D1
2
CL05A475MP5NRNC
4u7
Samsung Electro-Mechanics
C1, C2
2
CL05A105KA5NQNC
1u
Samsung Electro-Mechanics
C3, C4
5
CL05B104KO5NNNC
100n
Samsung Electro-Mechanics
C5, C7, C8, C10, C11
1
CGA0402X5R106M6R3GT
10u
TDK
C6
2
0402WGF5101TCE
5k1
UNI-ROYAL
R1, R2
1
0402WGF2002TCE
20k
UNI-ROYAL
R3
1
0402WGF1001TCE
1k
UNI-ROYAL
R4
Show 2 more
QtyPartRefs
2
0402WGF4701TCE
4k7
UNI-ROYAL
R6, R7
2
0402WGF1004TCE
1M
UNI-ROYAL
R8, R9

Pen mixer design files

The KiCad project lives in the Brillar0101/pen-mixer repository on GitHub; these links point at the commit this page was built from.

Pen mixer: common questions

How big is the Pen mixer PCB?

The Pen mixer measures 38 × 36.2 mm, has 4 copper layers and is 0.8 mm thick.

How many components are on the Pen mixer?

32 components, from 22 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Pen mixer design files?

From the Brillar0101/pen-mixer repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Pen mixer design in my own project?

Yes, under the terms of its MIT license, which Brillar0101 chose for the repository.

Similar boards