62 open source boards using the LSM6DS3TR-C
Real designs built with the LSM6DS3TR-C, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP32
WIBL
CCOMJHC
110 × 56 mm107 parts2LMIT11RP2040/RP2350
NerdYcontroller
KidsLabDe
69.8 × 35.2 mm109 parts4LNo license5ESP32
GlowBand
LEDs-by-glowingkitty
27.9 × 34.3 mm76 parts2LMIT4Gripper hat
nhnifong
65 × 30 mm52 parts4LNo license3STM32
Stm32-can ecu
dhruxraj
80 × 60 mm65 parts4LCERN-OHL-P-2.02STM32
Floppy-Ant-Controller
FloppyO1
65 × 60 mm53 parts2LCERN-OHL-S-2.02PaneledKit
williamthayer
93.6 × 94.4 mm226 parts2LNo license1STM32
Cc glasses
noahzhy
152.3 × 72 mm153 parts4LMIT1ESP32
NoU3
AlfredoSystems
46 × 56 mm113 parts4LNo license1Nordic nRF
LM20MeshNode
cvaldess
40 × 85.7 mm75 parts4LCERN-OHL-S-2.01Nordic nRF
Seeed Studio XIAO nRF52840 v1.1
kzoropoulos
21 × 17.8 mm70 parts4LNo license1LSM6DS3TR-C-Breakout
HackableElectronics
16.5 × 20.3 mm14 parts2LGPL-3.01STM32
Atlas drive
AtlasAutoware
140 × 90 mm377 parts6LNo license0RP2040/RP2350
SuperXBit192
kevinjuszczyk
38.1 × 50.8 mm269 parts6LGPL-3.00RP2040/RP2350
Best
sequoia-hope
33.7 × 71.8 mm252 parts6LMIT0ESP32
Q2-v2
0x616c6f6e
46 × 76 mm192 parts6LNo license0ESP32
Telem3
5aji
124 × 80 mm151 parts4LNo license0ESP32
TiltBox
Tom-Michiels
78 × 78 mm136 parts4LNo license0ESP32
Waypoint
M-Mrk
140 × 80 mm129 parts4LNo license0RP2040/RP2350
Simple earring
sequoia-hope
30.5 × 35.7 mm120 parts4LNo license0RP2040/RP2350
Bluebuzz rm2
sequoia-hope
26 × 56.8 mm104 parts6LNo license0Nordic nRF
XIAO nRF54l15
yuxiangcheng2002
21 × 17.8 mm101 parts6LNo license0STM32
Impulso stm32
ayemi-dev
100 × 70 mm87 parts2LNo license0ESP32
NeuralCard
Brillar0101
85.6 × 54 mm66 parts2LCERN-OHL-P-2.00ESP32
NeuralCard
Brillar0101
85.6 × 54 mm61 parts2LCERN-OHL-P-2.00ESP32
Open screen deck
vcazan
59.5 × 108.5 mm55 parts2LMIT0ESP32
Esp32 turd scooter controller
d0ng3o
61 × 61.2 mm35 parts2LGPL-3.00Pen mixer
Brillar0101
38 × 36.2 mm32 parts4LMIT0ESP32
TinyDyno
kgiorgi
72 × 72 mm32 parts2LMIT0Chili utility module hardware
chili-chip
16.4 × 14.8 mm15 parts2LNo license0RP2040/RP2350
Hermes
anshhh1269-cmd
48.5 × 45.5 mm7 parts2LNo license0Kidslab lamp
KidsLabDe
87.7 × 130.4 mm19 parts2LNo license5Nordic nRF
Seeed Studio XIAO nRF52840 v1.3
dhirptl
21 × 17.8 mm79 parts2LMIT3Nordic nRF
Seeed Studio XIAO nRF52840 v1.3
Videocraft10
21 × 17.8 mm79 parts2LMIT2PaneledKitDNP Variant 4-15
williamthayer
93.6 × 94.4 mm197 parts2LNo license1Nordic nRF
Seeed Studio XIAO nRF52840 v1.3
sinismylastname
21 × 17.8 mm79 parts2LNo license1
How designs wire the LSM6DS3TR-C
Read from the KiCad layouts of 51 open source designs, one per repository: what each pin of the LSM6DS3TR-C connects to, and the resistors, capacitors and other passives placed on it.
- The VDD pin has a decoupling capacitor on 50 of 51 designs, most often 100 nF (then 1 µF).
- The VDDIO pin has a decoupling capacitor on 49 of 51 designs, most often 100 nF (then 1 µF).
- The CS pin has a capacitor to GND on 44 of 51 designs, most often 100 nF (then 1 µF).
- The INT2 pin is left unconnected on 42 of 51 designs (a signal on 8).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| SDO/SA0pin 1 | Connected to: GND 76% | — |
| SDXpin 2 | Connected to: GND 75% | — |
| SCXpin 3 | Connected to: GND 75% | — |
| VDDIOpin 5 | Connected to: 3.3V 57% · a signal 43% |
|
| GNDpin 6, 7 | Connected to: GND 98% | — |
| VDDpin 8 | Connected to: 3.3V 57% · a signal 43% |
|
| INT2pin 9 | Connected to: Not connected 82% · a signal 16% | — |
| NCpin 10, 11 | Connected to: Not connected 100% | — |
| CSpin 12 | Connected to: Another IC 29% · 3.3V 47% |
|
| SCLpin 13 | Connected to: The microcontroller 55%, another IC 33% |
|
| SDApin 14 | Connected to: The microcontroller 55%, another IC 33% |
|
1 more pin varies from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include PcbBot by BerkeleyHCI, Seeed Studio XIAO nRF52840 v1.3 by Josephrp, WIBL by CCOMJHC and Kidslab lamp by KidsLabDe.
The LSM6DS3TR-C in open source designs
The gallery holds 62 open source boards using the LSM6DS3TR-C from 51 GitHub repositories; a typical one measures about 32.1 × 46.2 mm and carries around 79 components.
61% are two-layer designs, the rest use four layers or more, and 35% carry an open source license.
The most starred is PcbBot by BerkeleyHCI.
Parts used alongside the LSM6DS3TR-C
Microcontrollers on boards using the LSM6DS3TR-C
What boards using the LSM6DS3TR-C are built for
LSM6DS3TR-C: common questions
Where can I find a LSM6DS3TR-C reference design?
Each of the 62 boards on this page is a real design using the LSM6DS3TR-C. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the LSM6DS3TR-C VDD pin?
The VDD pin has a decoupling capacitor on 50 of 51 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 51 open source designs using the LSM6DS3TR-C.
What decoupling capacitors do designs use on the LSM6DS3TR-C VDDIO pin?
The VDDIO pin has a decoupling capacitor on 49 of 51 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 51 open source designs using the LSM6DS3TR-C.
How is the LSM6DS3TR-C CS pin connected?
The CS pin has a capacitor to GND on 44 of 51 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 51 open source designs using the LSM6DS3TR-C.
What parts are used alongside the LSM6DS3TR-C?
The 3.3V, BQ25100, USBLC6-2SC6, USBLC6-2P6 and AMS1117-3.3 appear in the most repositories here.
Which microcontrollers do boards using the LSM6DS3TR-C use?
Most are built on ESP32 (19), Nordic nRF (19), RP2040/RP2350 (6) and STM32 (6).
How big is a typical board using the LSM6DS3TR-C?
The median is 32.1 × 46.2 mm, and 61% are two-layer designs.
What is the most popular open source board using the LSM6DS3TR-C?
By GitHub stars, PcbBot by BerkeleyHCI, with 91 stars.
Can I simulate one of these boards using the LSM6DS3TR-C before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.