Coffee scale
BTrujillo816·coffee-scale·hardware/kicad/coffee-scale/coffee-scale.kicad_pcb
About the Coffee scale PCB
Coffee scale is an open source ESP32 PCB design by BTrujillo816, published on GitHub under the CC-BY-SA-4.0 license. It is a 2-layer board measuring 71.5 × 43.3 mm, with 42 components from 24 distinct parts.
Its main chip is the ESP32-S3-WROOM-1-N16, from the ESP32 family. Other key parts include the HX711, MCP73832T-5ACI/OT and AP2112R5-3.3TRG1. By type, the board carries 13 resistors, 11 capacitors, 4 ICs, 4 connectors, 3 transistors and 3 switches.
From the project
Coffee scale project for ECET 430
Main components on the Coffee scale
Coffee scale bill of materials (BOM)
42 components, 24 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ESP32-S3-WROOM-1-N16 ESP32-S3 | ESP32-S3-WROOM-1 | U1 |
| 1 | HX711 | SOP-16_3.9x9.9mm_P1.27mm | U2 |
| 1 | MCP73832T-5ACI/OT MCP73832-5-OT | SOT-23-5 | U3 |
| 1 | AP2112R5-3.3TRG1 AP2112/RT9080-3.3 | SOT-89-5_Handsoldering | U4 |
| 1 | DMG2301L-7 DMG3415U | SOT-23 | Q1 |
| 1 | S8550 | SOT-23-3 | Q2 |
| 1 | BSS138 | SOT-23 | Q3 |
| 1 | CONN_01X08 Conn_01x08 | PinHeader_1x08_P2.54mm_Vertical | J1 |
| 1 | CONN_01X04 Conn_01x04 | PinHeader_1x04_P2.54mm_Vertical | J2 |
| 1 | CONN_01X02 Conn_01x02 | JST_PH_S2B-PH-K_1x02_P2.00mm_Horizontal | J3 |
| 1 | USB4085-GF-A USB C | USB_C_Receptacle_GCT_USB4085 | J4 |
| 1 | Speaker | Buzzer_12x9.5RM7.6 | LS1 |
| 3 | SW_Push | SW_SPST_B3S-1000 | SW1, SW2, SW3 |
| 1 | PMEG4050EP,115 ~ | D_SOD-128 | D1 |
| 1 | LED | LED_1206_3216Metric_Pad1.42x1.75mm_HandSolder | D2 |
| 1 | DMG2301L-7 D_Schottky_Filled | D_SOD-128 | D4 |
| 7 | 10UF 10uF | C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C1, C2, C3, C4, C5, C6, C8 |
| 2 | 100NF 100nF | C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C7, C9 |
| 2 | 20P 20p | C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C10, C11 |
| 2 | 100K 100k | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R1, R2 |
Show 4 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 4 | 5.1K 5.1k | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R3, R4, R9, R10 |
| 4 | 100 | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R5, R6, R7, R8 |
| 1 | 10K 10k | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R11 |
| 2 | 22 | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R12, R13 |
Coffee scale design files
The KiCad project lives in the BTrujillo816/coffee-scale repository on GitHub; these links point at the commit this page was built from.
Coffee scale: common questions
What microcontroller does the Coffee scale use?
The Coffee scale is built around the ESP32-S3-WROOM-1-N16, from the ESP32 family.
How big is the Coffee scale PCB?
The Coffee scale measures 71.5 × 43.3 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Coffee scale?
42 components, from 24 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Coffee scale design files?
From the BTrujillo816/coffee-scale repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Coffee scale design in my own project?
Yes, under the terms of its CC-BY-SA-4.0 license, which BTrujillo816 chose for the repository.
Can I test firmware for the Coffee scale without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
More boards in coffee-scale
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k