25 open source boards using the ESP32-S3-WROOM-1-N16

Real designs built with the ESP32-S3-WROOM-1-N16, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

25 boardsClear filters|Most starred

How designs wire the ESP32-S3-WROOM-1-N16

Read from the KiCad layouts of 14 open source designs, one per repository: what each pin of the ESP32-S3-WROOM-1-N16 connects to, and the resistors, capacitors and other passives placed on it.

  • The EN pin has a capacitor to GND on 10 of 14 designs, most often 1 µF (then 100 nF).
  • The IO45 pin is left unconnected on 11 of 13 designs (a signal on 2).
  • The EN pin has a pull-up to 3.3V on 9 of 14 designs, most often 10 kΩ.
  • The 3V3 pin is tied to 3.3V on 10 of 14 designs (a signal on 2).
GNDpin 1, 40, 41Connected to: GND 90%
3V3pin 2Connected to: 3.3V 71%
ENpin 3Connected to: A connector 29%
  • Capacitor to GND on 71% · 1 µF (9), 100 nF (3)
  • Pull-up to 3.3V on 64% · 10 kΩ (9)
IO4pin 4Connected to: Signal 50% · not connected 43%
  • Series resistor on 36% · 100 Ω (4), 1 kΩ (1)
IO5pin 5Connected to: Signal 50% · not connected 36%
  • Series resistor on 36% · 100 Ω (4), 1 kΩ (1)
IO6pin 6Connected to: Signal 54% · not connected 46%
  • Series resistor on 38% · 100 Ω (4), 1 kΩ (1)
IO15pin 8Connected to: A connector 23% · not connected 38%
  • Pull-up to 3.3V on 31% · 100 kΩ (2), 51 kΩ (1), 10 kΩ (1)
IO16pin 9Connected to: Not connected 62% · a signal 38%
  • Series resistor on 38% · 100 Ω (2), 1 kΩ (1), 10 kΩ (1)
IO8pin 12Connected to: Signal 62% · not connected 38%
  • Pull-up to 3.3V on 38% · 4.7 kΩ (4), 2.2 kΩ (1)
IO19pin 13Connected to: A connector 38% · not connected 15%
  • Series resistor on 31% · 22 Ω (2), 100 Ω (1), 0 Ω (1)
IO20pin 14Connected to: A connector 38%
  • Series resistor on 31% · 22 Ω (2), 100 Ω (1), 0 Ω (1)
IO46pin 16Connected to: Not connected 77% · a signal 23%
IO9pin 17Connected to: Signal 100%
  • Series resistor on 54% · 1 kΩ (2), 200 Ω (2), 100 Ω (1)
  • Pull-up to 3.3V on 38% · 4.7 kΩ (4), 2.2 kΩ (1)
IO10pin 18Connected to: Signal 77% · not connected 23%
  • Series resistor on 54% · 200 Ω (2), 100 Ω (2), 47 Ω (1)
IO11pin 19Connected to: Signal 85% · not connected 15%
  • Series resistor on 38% · 33 Ω (2), 47 Ω (1), 10 kΩ (1)
IO12pin 20Connected to: Signal 77% · not connected 23%
  • Series resistor on 31% · 10 kΩ (3), 47 Ω (1)
IO13pin 21Connected to: Signal 77% · not connected 23%
  • Pull-up to 3.3V on 31% · 100 kΩ (2), 750 kΩ (1), 10 kΩ (1)
IO47pin 24Connected to: Signal 77% · not connected 23%
  • Series resistor on 31% · 200 Ω (2), 100 Ω (1)
IO48pin 25Connected to: Signal 77% · not connected 23%
  • Series resistor on 31% · 100 Ω (1), 22 Ω (1), 1 kΩ (1)
IO45pin 26Connected to: Not connected 85% · a signal 15%
IO0pin 27Connected to: A connector 31% · not connected 23%
  • Capacitor to GND on 31% · 100 nF (3), 1 µF (1)
  • Pull-up to 3.3V on 31% · 10 kΩ (4)
IO35pin 28Connected to: Not connected 62% · a signal 38%
IO36pin 29Connected to: Not connected 62% · a signal 38%
IO37pin 30Connected to: Not connected 62% · a signal 38%
IO38pin 31Connected to: Signal 62% · not connected 38%
  • Series resistor on 38% · 330 Ω (2), 100 Ω (1), 1 kΩ (1)
IO39pin 32Connected to: Signal 54% · not connected 46%
  • Series resistor on 31% · 150 Ω (2), 100 Ω (1), 1 kΩ (1)
IO40pin 33Connected to: Signal 54% · not connected 46%
  • Series resistor on 31% · 150 Ω (2), 100 Ω (1), 1 kΩ (1)
IO41pin 34Connected to: Signal 62% · not connected 38%
  • Series resistor on 38% · 200 Ω (2), 10 kΩ (2), 100 Ω (1)
IO2pin 38Connected to: Signal 62% · not connected 23%
  • Resistor to GND on 31% · 10 kΩ (2), 4.7 kΩ (1)
  • Series resistor on 31% · 33 kΩ (2), 10 kΩ (1), 1 kΩ (1)

10 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include AnthC by Anthilla, Aqm envcity hw by MateusMaruzka, QRET 25-26 SRAD Hybrid Upper Control Module by Queens-Rocket-Engineering-Team and Thermostat by jrtaylor71.

The ESP32-S3-WROOM-1-N16 in open source designs

The gallery holds 25 open source boards using the ESP32-S3-WROOM-1-N16 from 15 GitHub repositories; a typical one measures about 67.5 × 58.6 mm and carries around 88 components.

83% use four copper layers or more, and 28% carry an open source license.

The most starred is AnthC by Anthilla.

Microcontrollers on boards using the ESP32-S3-WROOM-1-N16

ESP32-S3-WROOM-1-N16: common questions

Where can I find a ESP32-S3-WROOM-1-N16 reference design?

Each of the 25 boards on this page is a real design using the ESP32-S3-WROOM-1-N16. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the ESP32-S3-WROOM-1-N16 EN pin connected?

The EN pin has a capacitor to GND on 10 of 14 designs, most often 1 µF (then 100 nF). Counted from the KiCad layouts of 14 open source designs using the ESP32-S3-WROOM-1-N16.

How is the ESP32-S3-WROOM-1-N16 IO45 pin connected?

The IO45 pin is left unconnected on 11 of 13 designs (a signal on 2). Counted from the KiCad layouts of 14 open source designs using the ESP32-S3-WROOM-1-N16.

How is the ESP32-S3-WROOM-1-N16 3V3 pin connected?

The 3V3 pin is tied to 3.3V on 10 of 14 designs (a signal on 2). Counted from the KiCad layouts of 14 open source designs using the ESP32-S3-WROOM-1-N16.

What parts are used alongside the ESP32-S3-WROOM-1-N16?

The USBLC6-2SC6, AMS1117-3.3, ADC_ADS131M04IPWR, DMP4065S-7 and ID_LM66100DCKR appear in the most repositories here.

Which microcontrollers do boards using the ESP32-S3-WROOM-1-N16 use?

Most are built on ESP32 (25).

How big is a typical board using the ESP32-S3-WROOM-1-N16?

The median is 67.5 × 58.6 mm, and 17% are two-layer designs.

What is the most popular open source board using the ESP32-S3-WROOM-1-N16?

By GitHub stars, AnthC by Anthilla, with 40 stars.

Can I simulate one of these boards using the ESP32-S3-WROOM-1-N16 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part