Coffee scale - Copy
BTrujillo816·coffee-scale·hardware/kicad/coffee-scale/coffee-scale - Copy.kicad_pcb
About the Coffee scale - Copy PCB
Coffee scale - Copy is an open source ESP32 PCB design by BTrujillo816, published on GitHub under the CC-BY-SA-4.0 license. It is a 2-layer board measuring 71.5 × 43.3 mm, with 42 components from 24 distinct parts.
Its main chip is the ESP32-S3-WROOM-1-N16, from the ESP32 family. Other key parts include the HX711, MCP73832T-5ACI/OT and AP2112R5-3.3TRG1. By type, the board carries 13 resistors, 11 capacitors, 4 ICs, 4 connectors, 3 transistors and 3 switches.
From the project
Coffee scale project for ECET 430
Main components on the Coffee scale - Copy
Coffee scale - Copy bill of materials (BOM)
42 components, 24 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ESP32-S3-WROOM-1-N16 ESP32-S3 | ESP32-S3-WROOM-1 | U1 |
| 1 | HX711 | SOP-16_3.9x9.9mm_P1.27mm | U2 |
| 1 | MCP73832T-5ACI/OT MCP73832-5-OT | SOT-23-5 | U3 |
| 1 | AP2112R5-3.3TRG1 AP2112/RT9080-3.3 | SOT-89-5_Handsoldering | U4 |
| 1 | DMG2301L-7 DMG3415U | SOT-23 | Q1 |
| 1 | S8550 | SOT-23-3 | Q2 |
| 1 | BSS138 | SOT-23 | Q3 |
| 1 | CONN_01X08 Conn_01x08 | PinHeader_1x08_P2.54mm_Vertical | J1 |
| 1 | CONN_01X04 Conn_01x04 | PinHeader_1x04_P2.54mm_Vertical | J2 |
| 1 | CONN_01X02 Conn_01x02 | JST_PH_S2B-PH-K_1x02_P2.00mm_Horizontal | J3 |
| 1 | USB4085-GF-A USB C | USB_C_Receptacle_GCT_USB4085 | J4 |
| 1 | Speaker | Buzzer_12x9.5RM7.6 | LS1 |
| 3 | SW_Push | SW_SPST_B3S-1000 | SW1, SW2, SW3 |
| 1 | PMEG4050EP,115 ~ | D_SOD-128 | D1 |
| 1 | LED | LED_1206_3216Metric_Pad1.42x1.75mm_HandSolder | D2 |
| 1 | DMG2301L-7 D_Schottky_Filled | D_SOD-128 | D4 |
| 7 | 10UF 10uF | C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C1, C2, C3, C4, C5, C6, C8 |
| 2 | 100NF 100nF | C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C7, C9 |
| 2 | 20P 20p | C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C10, C11 |
| 2 | 100K 100k | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R1, R2 |
Show 4 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 4 | 5.1K 5.1k | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R3, R4, R9, R10 |
| 4 | 100 | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R5, R6, R7, R8 |
| 1 | 10K 10k | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R11 |
| 2 | 22 | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R12, R13 |
Coffee scale - Copy design files
The KiCad project lives in the BTrujillo816/coffee-scale repository on GitHub; these links point at the commit this page was built from.
Coffee scale - Copy: common questions
What microcontroller does the Coffee scale - Copy use?
The Coffee scale - Copy is built around the ESP32-S3-WROOM-1-N16, from the ESP32 family.
How big is the Coffee scale - Copy PCB?
The Coffee scale - Copy measures 71.5 × 43.3 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Coffee scale - Copy?
42 components, from 24 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Coffee scale - Copy design files?
From the BTrujillo816/coffee-scale repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the Coffee scale - Copy design in my own project?
Yes, under the terms of its CC-BY-SA-4.0 license, which BTrujillo816 chose for the repository.
Can I test firmware for the Coffee scale - Copy without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
More boards in coffee-scale
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k