Module-I2C-picohub-MOD-0011

buildwithnoknok·module-I2C-picohub-MOD-0011·hardware/kicad/MOD-0011.kicad_pcb

Module-I2C-picohub-MOD-0011 layout, top view — open source WCH CH32/CH55x board by buildwithnoknok

About the Module-I2C-picohub-MOD-0011

Module-I2C-picohub-MOD-0011 is an open source WCH CH32/CH55x PCB design by buildwithnoknok, published on GitHub under the MIT license. It is a 2-layer board measuring 80 × 40 mm, with 113 components from 45 distinct parts.

Its main chip is the CH32X035G8U6, from the WCH CH32/CH55x family. Other key parts include the TPS54302DDCR, SY6280AAC, INA180A2IDBVR, ME6203A33M3G and AP2114H-3.3TRG1. By type, the board carries 38 capacitors, 36 resistors, 18 diodes, 10 ICs, 8 connectors and 1 fuse.

It belongs with the power & battery designs in this gallery.

From the project

noknok PicoHub (MOD-0011): Pico 2 W carrier with a USB-PD power manager (CH32X035), Qwiic ports, USB host port and mezzanine interface. Firmware MIT, hardware CC BY-SA 4.0.

noknok ID: MOD-0011. The noknok PicoHub: a carrier board for the Raspberry Pi Pico 2 W (the noknok brain) with its own power manager. Status: rev 1.0 built and brought up (October 2026); power-manager firmware v0.2.0.

- Power in: USB-C on J1, any charger. A plain 5 V adapter runs the board (enough for small products); a USB-PD charger is asked for 9 V by default and up to 20 V / 3 A (60 W, any ordinary cable) when the load or a mezzanine needs it. - Power manager: a CH32X035 that negotiates USB-PD, switches every rail, watches input current, temperature and the 5 V rail, and protects the…

Main components on the Module-I2C-picohub-MOD-0011

Module-I2C-picohub-MOD-0011 bill of materials (BOM)

113 components, 45 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
CH32X035G8U6
WCH
U1
1
TPS54302DDCR
TPS54302
TI
U2
4
SY6280AAC
noknok_SY6280AAC
Silergy
U3, U7, U8, U11
1
INA180A2IDBVR
INA180A2
TI
U4
1
ME6203A33M3G
noknok_ME6203A33M3G
Microne
U5
2
AP2114H-3.3TRG1
noknok_AP2114H-3.3
Diodes Inc
U6, U9
1
TYPE-C-31-M-12
USB-C USB (Power)
HRO
J1
1
TYPE-C-31-M-12
USB-C USB (host)
HRO
J2
1
JST SH port 1 (bus A)
JST
J3
1
JST SH port 2 (bus A)
JST
J4
1
JST SH port 3 (bus B)
JST
J5
1
JST SH port 4 (bus B)
JST
J6
1
DS1023-1X20SF11
noknok_Pico_Socket_P1-20
CONNFLY
J14
1
DS1023-1X20SF11
noknok_Pico_Socket_P21-40
CONNFLY
J15
1
2920L500/30GR
PTC 5A 30V
LUTE
F1
1
KNTC0603/10KF3950
Thermistor_NTC
KUU
TH1
15
ESD9B5.0ST5G
ESD 5V
onsemi
D1, D2, D6, D7, D8, D9, D10, D11 +7
1
SMAJ24A
SMAJ24A (24V standoff)
GOODWORK
D3
1
KT-0603R
LED
Hubei KENTO
D4
1
SS34
MDD
D5
Show 25 more
QtyPartRefs
1
AMRU00060630100MA1
10uH 4A
Chilisin
L1
11
CC0603KRX7R9BB104
0.1uF
YAGEO
C1, C6, C12, C20, C22, C24, C26, C30 +3
2
CL31B475KBHNNNE
4.7uF 50V
Samsung
C2, C3
1
CL10B105KB8NQNC
1uF 50V
Samsung
C4
8
CL10B105KB8NQNC
1uF
Samsung
C5, C7, C15, C17, C27, C28, C29, C33
1
CL32B106KBJNNNE
10uF 50V
Samsung
C8
1
CC0603KRX7R9BB104
0.1uF 50V
YAGEO
C9
2
CL21A226MPQNNNE
22uF 10V
Samsung
C10, C11
1
0603CG750J500NT
75pF
FH
C13
4
CL21A106KAYNNNE
10uF
Samsung
C14, C16, C18, C34
4
CL21A475KAQNNNE
4.7uF
Samsung
C19, C21, C23, C25
1
CL10B223KB8NNNC
22nF
Samsung
C35
2
CL10B102KB8NNNC
0.001uF
Samsung
C36, C37
2
0603WAF5101T5E
5.1k
UNI-ROYAL
R1, R2
1
JER2512F3R010
10m 1%
JIERR
R3
1
0603WAF1001T5E
1k
UNI-ROYAL
R4
11
0603WAF1003T5E
100k
UNI-ROYAL
R5, R8, R9, R10, R11, R12, R14, R29 +3
5
0603WAF1002T5E
10k
UNI-ROYAL
R6, R15, R17, R18, R37
1
0603WAF2201T5E
2.2k
UNI-ROYAL
R7
1
0603WAF1332T5E
13.3k
UNI-ROYAL
R13
2
0603WAF4701T5E
4.7k
UNI-ROYAL
R16, R34
2
0603WAF2202T5E
22k
UNI-ROYAL
R19, R20
2
0603WAF220JT5E
22R
UNI-ROYAL
R21, R22
4
0603WAF3301T5E
3.3k
UNI-ROYAL
R23, R24, R25, R26
4
0603WAF4702T5E
47k
UNI-ROYAL
R27, R28, R35, R36

Module-I2C-picohub-MOD-0011 design files

The KiCad project lives in the buildwithnoknok/module-I2C-picohub-MOD-0011 repository on GitHub; these links point at the commit this page was built from.

Module-I2C-picohub-MOD-0011: common questions

What microcontroller does the Module-I2C-picohub-MOD-0011 use?

The Module-I2C-picohub-MOD-0011 is built around the CH32X035G8U6, from the WCH CH32/CH55x family.

How big is the Module-I2C-picohub-MOD-0011?

The Module-I2C-picohub-MOD-0011 measures 80 × 40 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Module-I2C-picohub-MOD-0011?

113 components, from 45 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Module-I2C-picohub-MOD-0011 design files?

From the buildwithnoknok/module-I2C-picohub-MOD-0011 repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Module-I2C-picohub-MOD-0011 design in my own project?

Yes, under the terms of its MIT license, which buildwithnoknok chose for the repository.

Can I test firmware for the Module-I2C-picohub-MOD-0011 without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug WCH CH32/CH55x firmware against it before you order a PCB.

Similar boards