SchrittMacher
c-base·c-ynth·SchrittMacher/SchrittMacher.kicad_pcb
About the SchrittMacher PCB
SchrittMacher is an open source PCB design by c-base, published on GitHub. It is a 2-layer board measuring 99.7 × 71.5 mm, with 90 components from 17 distinct parts.
Other key parts include the TL072, 4017 and LM555N. By type, the board carries 25 resistors, 22 diodes, 12 switches, 10 transistors, 5 connectors and 3 ICs.
It belongs with the audio designs in this gallery.
From the project
data collection and source files for synth
16 Step sequencer Gate Out Clock Out Clock In Global CV Out CV Out per Step Reset Per Step Reset In
Main components on the SchrittMacher
SchrittMacher bill of materials (BOM)
90 components, 17 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | TL072 | DIP-8_W7.62mm_LongPads | U1 |
| 1 | 4017 | DIP-16_W7.62mm_LongPads | U2 |
| 1 | LM555N | DIP-8_W7.62mm_LongPads | U3 |
| 10 | BC547 | TO-92_Inline_Wide | Q1, Q2, Q3, Q4, Q5, Q6, Q7, Q8 +2 |
| 1 | BARREL_JACK | JACK_ALIM | CON1 |
| 4 | JACK_2P | Socket_Strip_Straight_1x03 | J1, J2, J3, J4 |
| 1 | 1M | Potentiometer_WirePads_Small | RV1 |
| 10 | 100K | Potentiometer_WirePads_Small | RV2, RV3, RV4, RV5, RV6, RV7, RV8, RV9 +2 |
| 2 | SPST | Socket_Strip_Straight_1x02 | SW1, SW2 |
| 10 | SWITCH_INV_MSM | SW_Micro_SPST | SW3, SW4, SW5, SW6, SW7, SW8, SW9, SW10 +2 |
| 10 | LED | LED-5MM | D1, D2, D3, D4, D5, D11, D12, D13 +2 |
| 12 | 1N914 | Diode_DO-35_SOD27_Horizontal_RM10 | D6, D7, D8, D9, D10, D16, D17, D18 +4 |
| 1 | 10nF | C_Disc_D3_P2.5 | C1 |
| 1 | 2.2uF | C_Radial_D5_L6_P2.5 | C2 |
| 5 | 10K | Resistor_Horizontal_RM10mm | R1, R2, R3, R4, R5 |
| 10 | 680 | Resistor_Horizontal_RM10mm | R6, R8, R10, R12, R14, R16, R18, R20 +2 |
| 10 | 100K | Resistor_Horizontal_RM10mm | R7, R9, R11, R13, R15, R17, R19, R21 +2 |
SchrittMacher design files
The KiCad project lives in the c-base/c-ynth repository on GitHub; these links point at the commit this page was built from.
SchrittMacher: common questions
How big is the SchrittMacher PCB?
The SchrittMacher measures 99.7 × 71.5 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the SchrittMacher?
90 components, from 17 distinct parts. The full bill of materials is listed on this page.
Where can I download the SchrittMacher design files?
From the c-base/c-ynth repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the SchrittMacher design in my own project?
The repository has no license, so all rights stay with c-base. Use it as a reference, and ask the author before reusing the design.
More boards in c-ynth
Similar boards
KLOR
GEIGEIGEIST
160.2 × 118.3 mm79 parts2LGPL-3.01.2kButtonsLEDs
shanteacontrols
390 × 37 mm82 parts2LApache-2.0956USB
shanteacontrols
52 × 12.6 mm6 parts2LApache-2.0956Pots
shanteacontrols
390 × 93 mm75 parts2LApache-2.0956PicoGUS Hand386
polpo
29.2 × 75.2 mm43 parts4LGPL-2.0800Snark barker
schlae
231.1 × 106.7 mm193 parts2LNo license687