18 open source boards using the LM555N
Real designs built with the LM555N, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Soil moisture2
acolomitchi
3.1 × 3.1 mm23 parts2LCC-BY-NC-4.026Goblin
echopen
35 × 50 mm60 parts2LNo license19BSPD +
formulaslug
160 × 124.7 mm137 parts2LNo license2SchrittMacher
c-base
99.7 × 71.5 mm90 parts2LNo license2Mainboard
B0rgar
108 × 48.3 mm75 parts2LNo license1Twilight switch
joseguerra3000
73 × 35.6 mm21 parts2LNo license1Turtable control board hbridge
trublion
89.4 × 50 mm106 parts2LMIT0- schematic only · 8 parts
KiCAD Netlist Parser
arin-banerjee
8 partsNo license0 Soil moisture2x4-b4-export
acolomitchi
92.7 × 92.6 mm23 parts2LCC-BY-NC-4.026Control board
m0xpd
108 × 88 mm97 parts2LCC-BY-SA-4.025DB-tr switch tgc v1 2
echopen
63.5 × 52.1 mm57 parts2LNo license19Accumulator Board
formulaslug
139.7 × 88.9 mm105 parts2LNo license2Nixie supply
electrojustin
66 × 50.8 mm26 parts2LNo license0Soil moisture2x4
acolomitchi
99.8 × 99.8 mm21 parts2LCC-BY-NC-4.026DB-supply v1
echopen
54.6 × 52.1 mm29 parts2LNo license19Charging Shutdown Circuit
formulaslug
139.7 × 88.9 mm37 parts2LNo license2DB-pulser v3
echopen
47 × 52.1 mm17 parts2LNo license19DB-high voltage v2
echopen
35.6 × 52.1 mm6 parts2LNo license19
How designs wire the LM555N
Read from the KiCad layouts of 9 open source designs, one per repository: what each pin of the LM555N connects to, and the resistors, capacitors and other passives placed on it.
- The CV pin has a capacitor to GND on 6 of 8 designs, most often 10 nF (then 1 nF).
- The R pin is tied to 5V on 7 of 8 designs.
- The TR pin has a capacitor to GND on 4 of 9 designs, most often 4.7 µF (then 2.2 µF).
- The THR pin has a capacitor to GND on 4 of 8 designs, most often 4.7 µF (then 2.2 µF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| GNDpin 1 | Connected to: GND 100% | — |
| TRpin 2 | Connected to: Signal 89% |
|
| Qpin 3 | Connected to: Signal 89% |
|
| Rpin 4 | Connected to: 5V 88% | — |
| CVpin 5 | Connected to: Signal 75% |
|
| THRpin 6 | Connected to: Signal 100% |
|
| DISpin 7 | Connected to: Not connected 50% · a signal 50% |
|
| V+pin 8 | Connected to: 5V 89% | — |
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Soil moisture2 by acolomitchi, Control board by m0xpd, DB-high voltage v2 by echopen and SchrittMacher by c-base.
The LM555N in open source designs
The gallery holds 18 open source boards using the LM555N from 10 GitHub repositories; a typical one measures about 89.4 × 52.1 mm and carries around 33 components.
100% are two-layer designs, the rest use four layers or more, and 11% carry an open source license.
The most starred is Soil moisture2 by acolomitchi.
Parts used alongside the LM555N
What boards using the LM555N are built for
LM555N: common questions
Where can I find a LM555N reference design?
Each of the 18 boards on this page is a real design using the LM555N. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the LM555N CV pin connected?
The CV pin has a capacitor to GND on 6 of 8 designs, most often 10 nF (then 1 nF). Counted from the KiCad layouts of 9 open source designs using the LM555N.
How is the LM555N R pin connected?
The R pin is tied to 5V on 7 of 8 designs. Counted from the KiCad layouts of 9 open source designs using the LM555N.
How is the LM555N TR pin connected?
The TR pin has a capacitor to GND on 4 of 9 designs, most often 4.7 µF (then 2.2 µF). Counted from the KiCad layouts of 9 open source designs using the LM555N.
How big is a typical board using the LM555N?
The median is 89.4 × 52.1 mm, and 100% are two-layer designs.
What is the most popular open source board using the LM555N?
By GitHub stars, Soil moisture2 by acolomitchi, with 26 stars.
Can I simulate one of these boards using the LM555N before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.