HishBoard v1
camelone49·HishBoard_v1
About the HishBoard v1 PCB
HishBoard v1 is an open source ESP32 PCB design by camelone49, published on GitHub. It is a 4-layer board measuring 362.5 × 166 mm, with 334 components from 64 distinct parts.
Its main chip is the ESP32-WROOM-32E, from the ESP32 family. Other key parts include the MAX77837EWA+T, MAX42410AFOA+T, MAX17055ETB+T, CH340C and MAX77986AEFD_T. By type, the board carries 174 diodes, 88 switches, 38 capacitors, 12 resistors, 9 ICs and 5 connectors.
It belongs with the keyboards and iot & wireless designs in this gallery.
From the project
This is a repo for my new gaming keyboard, which will include all files (eventually =) )
The Board is done using KiCad and is designed to meet my special requirements: 1. Wireless (Hence ESP32) 2. Can switch automatically between 3 devices that are saved on the board 3. Mechanical Switches (Blue in My Case) 4. Using 3.7V Batteries (chargable), to not have to buy new one-time use batteries all the time 5. LEDs for extra performance, as widely known
Main components on the HishBoard v1
HishBoard v1 bill of materials (BOM)
334 components, 64 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | MAX77837EWA+T | BGA8C40P4X2_181X100X69 | IC1 |
| 1 | MAX42410AFOA+T | MAX42410AFOAT | IC2 |
| 1 | MAX17055ETB+T | SON40P250X200X80-11N | IC3 |
| 1 | ~ | COM-ZY12PDG | U1 |
| 1 | CH340C | SOIC-16_3.9x9.9mm_P1.27mm | U2 |
| 1 | MAX77986AEFD_T | IC_MAX77986AEFD_T | U3 |
| 1 | ESP32-WROOM-32E | ESP32-WROOM-32D | U4 |
| 1 | SN74LV1T34DBV | SOT-23-5 | U6 |
| 1 | USBLC6-2SC6 | SOT-23-6 | U11 |
| 2 | BSS138 | SOT-23 | Q1, Q2 |
| 1 | USB_C_Receptacle_USB2.0_16P | USB_C_Receptacle_GCT_USB4085 | J1 |
| 1 | Conn_01x10_Socket | PinHeader_1x10_P1.00mm_Vertical | J2 |
| 1 | OLED_128x64 | OLED_128x64 | J3 |
| 2 | Conn_01x02 | JST_EH_S2B-EH_1x02_P2.50mm_Horizontal | J7, J8 |
| 1 | Polyfuse_5A | Fuse_1206_3216Metric_Pad1.42x1.75mm_HandSolder | F1 |
| 75 | Keyswitch | MX_PCB_1.00u | S1, S2, S3, S4, S5, S6, S7, S8 +67 |
| 1 | Keyswitch | MX_PCB_2.00u | S27 |
| 1 | Keyswitch | MX_PCB_1.50u | S29 |
| 1 | Keyswitch | MX_PCB_ISOEnter | S42 |
| 2 | Keyswitch | MX_PCB_1.75u | S43, S68 |
Show 44 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 4 | Keyswitch | MX_PCB_1.25u | S56, S73, S75, S76 |
| 1 | Keyswitch | MX_PCB_6.25u | S74 |
| 1 | MX_stab | STAB_MX_6.25u | S86 |
| 1 | MX_stab | STAB_MX_ISO | S89 |
| 1 | MX_stab | STAB_MX_2u | S90 |
| 1 | 10k | THRMC1608X95N | TH1 |
| 85 | Diode | Diode_DO-35 | D1, D2, D3, D4, D5, D6, D7, D8 +77 |
| 2 | LED_Small | KBEELP4112P1R2363X4X5R18 | D86, D87 |
| 87 | Inolux_IN-PI554FCH | RGB_hole_5050_inolux | D89, D90, D91, D92, D93, D94, D96, D97 +79 |
| 1 | BLM31SN500SZ | BLM_ferritebead_6A_50Ohm | FB1 |
| 1 | 1 uH | INDC3225X120N | L1 |
| 2 | 2.2 uH | INDPM110100X400N | L2, L3 |
| 6 | 22 uF/6.3V | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C10, C15, C26, C27, C28 |
| 1 | 22uF/35V | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C2 |
| 1 | 0.1uF/35V | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C3 |
| 5 | 0.1 uF/6.3V | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C4, C6, C7, C13, C24 |
| 1 | 22uF/6.3V | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C5 |
| 1 | 0.1 uF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C8 |
| 1 | 0.1uF/6.3V | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C11 |
| 2 | 4.7 uF/35V | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C12, C35 |
| 1 | 0.47 uF/6.3V | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C14 |
| 1 | 0.1 uF/35V | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C16 |
| 1 | 2.2 uF / 35V | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C17 |
| 3 | 1 uF/6.3V | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C18, C19, C20 |
| 1 | 0.1 uF / 35V | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C21 |
| 1 | 22 uF/35V | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C22 |
| 1 | 22 uF 35V | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C23 |
| 1 | 0.1uF/10V | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C25 |
| 1 | 10 nF/10V | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C29 |
| 4 | 100uF/10V | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C30, C31, C32, C33 |
| 1 | 220pF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C34 |
| 1 | 2.2 uF/6.3V | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C36 |
| 2 | 10 uF/10V | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C37, C38 |
| 1 | 100nF/6.3V | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C39 |
| 2 | 10k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R5 |
| 2 | 4.7k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R2, R3 |
| 1 | 100k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R4 |
| 1 | 89.25 kOhm | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R6 |
| 1 | 17kOhm | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R7 |
| 1 | 113 kOhm | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R8 |
| 1 | 226 kOhm | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R9 |
| 1 | 5mOhm | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R10 |
| 1 | 4.7 kOhm | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R11 |
| 1 | 500Ohm | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R12 |
HishBoard v1 design files
The KiCad project lives in the camelone49/HishBoard_v1 repository on GitHub; these links point at the commit this page was built from.
- Layoutv4.kicad_pcb
- Schematicv4.kicad_sch
HishBoard v1: common questions
What microcontroller does the HishBoard v1 use?
The HishBoard v1 is built around the ESP32-WROOM-32E, from the ESP32 family.
How big is the HishBoard v1 PCB?
The HishBoard v1 measures 362.5 × 166 mm, has 4 copper layers and is 1.6062 mm thick.
How many components are on the HishBoard v1?
334 components, from 64 distinct parts. The full bill of materials is listed on this page.
Where can I download the HishBoard v1 design files?
From the camelone49/HishBoard_v1 repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the HishBoard v1 design in my own project?
The repository has no license, so all rights stay with camelone49. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the HishBoard v1 without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k