ESP32 Purple

Cath272·ESP32_Purple

ESP32 Purple PCB layout, top view — open source ESP32 board by Cath272

About the ESP32 Purple PCB

ESP32 Purple is an open source ESP32 PCB design by Cath272, published on GitHub under the MIT license. It is a 2-layer board measuring 83.9 × 76 mm, with 36 components from 22 distinct parts.

Its main chip is the ESP32-WROOM-32D, from the ESP32 family. Other key parts include the AMS1117-3.3 and CH343P. By type, the board carries 14 resistors, 7 capacitors, 5 connectors, 3 ICs, 3 diodes and 2 transistors.

It belongs with the iot & wireless and displays & leds designs in this gallery.

From the project

The ESP32 PURPLE was build because i wanted to design my own esp32 based microcontroller with a few extra features.

The ESP32 PURPLE was build because i wanted to design my own esp32 based microcontroller with a few extra features.

-USB TYPE-C port with c to c cable support,

-14Pin Connector for a ST7735 Display(0.5mm pitch),

LCD: DC:IO26 , MOSI:IO23, SCK:IO18, CS:IO5

MicroSD: MISO:IO19, SCK:IO18, MOSI:IO23 , CS_SD:IO5

ESP32 Purple, from the project README
From the project README

Main components on the ESP32 Purple

ESP32 Purple bill of materials (BOM)

36 components, 22 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
ESP32-WROOM-32D
U1
1
AMS1117-3.3
U2
1
CH343P
U3
2
BC817
Q1, Q2
1
USB_C_RECEPTACLE_USB2.0_16P
USB_C_Receptacle_USB2.0_16P
J1
2
CONN_01X20_SOCKET
Conn_01x20_Socket
J3, J4
1
Micro_SD_Card
J5
1
5034801400
J6
2
SW_Push
SW2, SW3
2
LED
D1, D3
1
1N5819WS
D2
2
22UF
22uF
C1, C2
1
0.1UF
0.1uF
C3
2
1UF
1uF
C4, C5
1
100NF
100nF
C6
1
100uF 6.3V
C7
1
1.5K
1.5k
R1
3
5.1K
5.1k
R2, R3, R8
4
10K
R4, R5, R10, R12
1
1K
R6
Show 2 more
QtyPartRefs
1
7.5R
R7
4
470
R9, R11, R13, R15

ESP32 Purple design files

The KiCad project lives in the Cath272/ESP32_Purple repository on GitHub; these links point at the commit this page was built from.

ESP32 Purple: common questions

What microcontroller does the ESP32 Purple use?

The ESP32 Purple is built around the ESP32-WROOM-32D, from the ESP32 family.

How big is the ESP32 Purple PCB?

The ESP32 Purple measures 83.9 × 76 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the ESP32 Purple?

36 components, from 22 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the ESP32 Purple design files?

From the Cath272/ESP32_Purple repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the ESP32 Purple design in my own project?

Yes, under the terms of its MIT license, which Cath272 chose for the repository.

Can I test firmware for the ESP32 Purple without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

Similar boards