Keyboard
Catsarepro21·keyboard·pcb/keeb_pcb.kicad_pcb
About the Keyboard PCB
Keyboard is an open source RP2040/RP2350 PCB design by Catsarepro21, published on GitHub. It is a 2-layer board measuring 360 × 124.3 mm, with 357 components from 32 distinct parts.
Its main chip is the Raspberry Pi Pico W, from the RP2040/RP2350 family. Other key parts include the MCP73831-2-OT, SN74LVC1T45DBVR, TPS2553DBVR, PCA9536DR and TPS22918DBVR. By type, the board carries 88 capacitors, 86 switches, 82 diodes, 79 LEDs, 12 resistors and 5 ICs.
It belongs with the keyboards and power & battery designs in this gallery.
From the project
Its a custom keyboard! My current keyboard is pretty bad, and I thought why not make one, so i designed it.
Its a custom keyboard! My current keyboard is pretty bad, and I thought why not make one, so i designed it.
KEEB is an 80-key keyboard built around a Pico W, with USB and Bluetooth, a rechargeable battery, a volume encoder, and an OLED. It has a custom PCB and a 3D printed case with the switch plate built into the top. RGB only works when plugged into USB, which I think is fine.

Main components on the Keyboard
Keyboard bill of materials (BOM)
357 components, 32 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | MCP73831-2-OT | SOT-23-5 | U1 |
| 1 | SN74LVC1T45DBVR | SOT-23-6 | U2 |
| 1 | TPS2553DBVR | SOT-23-6 | U3 |
| 1 | PCA9536DR | SOIC-8_3.9x4.9mm_P1.27mm | U4 |
| 1 | TPS22918DBVR | SOT-23-6 | U5 |
| 1 | Raspberry Pi Pico W | RaspberryPi_Pico_Common_THT_Bare_W | A1 |
| 1 | BSS138LT1G | SOT-23 | Q2 |
| 1 | Conn_01x04 | PinHeader_1x04_P2.54mm_Vertical | J1 |
| 1 | EC11 | RotaryEncoder_Alps_EC11E-Switch_Vertical_H20mm | ENC1 |
| 1 | J_BAT | JST_PH_B2B-PH-K_1x02_P2.00mm_Vertical | JST_1 |
| 4 | MX_stab | STAB_MX_2u | S1, S3, S4, S7 |
| 1 | MX_stab_6.25u | STAB_MX_6.25u | S8 |
| 1 | SW_PWR | SW_Slide-03_Wuerth-WS-SLTV_10x2.5x6.4_P2.54mm | SW1 |
| 77 | SW_Push | SW_MX_1u | SW2, SW3, SW4, SW5, SW6, SW7, SW8, SW9 +69 |
| 1 | SW_Push | SW_MX_1u_RGB_Clearance | SW12 |
| 1 | Programmable 1 | SW_MX_1u | SW94 |
| 1 | Programmable 2 | SW_MX_1u | SW95 |
| 79 | SK6812MINI-E | LED_SK6812MINI-E_3.2x2.8mm_P1.5mm_ReverseMount | RGB1, RGB2, RGB3, RGB4, RGB5, RGB6, RGB7, RGB8 +71 |
| 1 | SS14 | D_SMA | D1 |
| 81 | 1N4148 | D_DO-35_SOD27_P7.62mm_Horizontal | D2, D3, D4, D5, D6, D7, D8, D9 +73 |
Show 12 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | 10uF | C_0805_2012Metric | C1, C2 |
| 82 | 100nF | C_0603_1608Metric | C3, C4, C5, C101, C102, C103, C104, C105 +74 |
| 2 | 1uF | C_0805_2012Metric | C6, C10 |
| 1 | 22uF | C_1206_3216Metric | C7 |
| 1 | 10nF | C_0603_1608Metric | C9 |
| 1 | 10k | R_0805_2012Metric | R1 |
| 1 | 330 | R_0603_1608Metric | R2 |
| 2 | 100k | R_0603_1608Metric | R3, R4 |
| 3 | 2.2k | R_0603_1608Metric | R5, R6, R10 |
| 2 | 4.7k | R_0603_1608Metric | R7, R8 |
| 2 | 10k | R_0603_1608Metric | R9, R11 |
| 1 | 160k | R_0603_1608Metric | R12 |
Keyboard design files
The KiCad project lives in the Catsarepro21/keyboard repository on GitHub; these links point at the commit this page was built from.
- Layoutpcb/keeb_pcb.kicad_pcb
- Schematicpcb/keeb_pcb.kicad_sch
Keyboard: common questions
What microcontroller does the Keyboard use?
The Keyboard is built around the Raspberry Pi Pico W, from the RP2040/RP2350 family.
How big is the Keyboard PCB?
The Keyboard measures 360 × 124.3 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Keyboard?
357 components, from 32 distinct parts. The full bill of materials is listed on this page.
Where can I download the Keyboard design files?
From the Catsarepro21/keyboard repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Keyboard design in my own project?
The repository has no license, so all rights stay with Catsarepro21. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Keyboard without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.
Similar boards
RP2040/RP2350
OSO-BOOK-C1
joeycastillo
85 × 115 mm29 parts2LCC-BY-SA-4.08.1kRP2040/RP2350
Corne chocolate
foostan
277.2 × 107.5 mm164 parts2LCC-BY-4.07.7kRP2040/RP2350
Corne cherry
foostan
277.2 × 107.5 mm164 parts2LCC-BY-4.07.7kRP2040/RP2350
Jitx design
gusmanb
55.5 × 65 mm26 parts4LGPL-3.05.0kRP2040/RP2350
LogicAnalyzer
gusmanb
57 × 55.2 mm6 parts2LGPL-3.05.0kRP2040/RP2350
Main
google
98 × 71 mm102 parts2LApache-2.02.9k