36 open source boards using the SN74LVC1T45DBVR

Real designs built with the SN74LVC1T45DBVR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

36 boardsClear filters|Most starred

How designs wire the SN74LVC1T45DBVR

Read from the KiCad layouts of 19 open source designs, one per repository: what each pin of the SN74LVC1T45DBVR connects to, and the resistors, capacitors and other passives placed on it.

  • The VCCA_1 pin has a decoupling capacitor on 15 of 19 designs, most often 100 nF (then 10 µF).
  • The VCCB_6 pin has a decoupling capacitor on 14 of 19 designs, most often 100 nF (then 1 µF).
  • The B_4 pin has a series resistor on 9 of 19 designs, most often 33 Ω (then 330 Ω).
VCCA_1pin 1Connected to: 3.3V 84% · a signal 16%
  • Decoupling capacitor on 79% · 100 nF (22), 10 µF (1)
GND_2pin 2Connected to: GND 89%
A_3pin 3Connected to: The microcontroller 47%
  • Resistor to GND on 37% · 100 kΩ (6), 2.2 kΩ (1)
B_4pin 4Connected to: A connector 21%
  • Series resistor on 47% · 33 Ω (3), 330 Ω (3), 1 kΩ (1)
VCCB_6pin 6Connected to: 5V 63% · a signal 37%
  • Decoupling capacitor on 74% · 100 nF (28), 1 µF (3), 10 µF (3)

1 more pin varies from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Ovc by osrf, Wasca by hitomi2500, X1p-004 by jwise and Spiflash by florolf.

The SN74LVC1T45DBVR in open source designs

The gallery holds 36 open source boards using the SN74LVC1T45DBVR from 20 GitHub repositories; a typical one measures about 110.5 × 56 mm and carries around 112 components.

74% use four copper layers or more, and 25% carry an open source license.

The most starred is Ovc by osrf.

Microcontrollers on boards using the SN74LVC1T45DBVR

SN74LVC1T45DBVR: common questions

Where can I find a SN74LVC1T45DBVR reference design?

Each of the 36 boards on this page is a real design using the SN74LVC1T45DBVR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What decoupling capacitors do designs use on the SN74LVC1T45DBVR VCCA_1 pin?

The VCCA_1 pin has a decoupling capacitor on 15 of 19 designs, most often 100 nF (then 10 µF). Counted from the KiCad layouts of 19 open source designs using the SN74LVC1T45DBVR.

What decoupling capacitors do designs use on the SN74LVC1T45DBVR VCCB_6 pin?

The VCCB_6 pin has a decoupling capacitor on 14 of 19 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 19 open source designs using the SN74LVC1T45DBVR.

What resistor goes on the SN74LVC1T45DBVR B_4 pin?

The B_4 pin has a series resistor on 9 of 19 designs, most often 33 Ω (then 330 Ω). Counted from the KiCad layouts of 19 open source designs using the SN74LVC1T45DBVR.

What parts are used alongside the SN74LVC1T45DBVR?

The USBLC6-2SC6, SN74LVC1G17DBVR, TPS63070RNMR, AMS1117-3.3 and ESP32-S3-WROOM-1-N16 appear in the most repositories here.

Which microcontrollers do boards using the SN74LVC1T45DBVR use?

Most are built on ESP32 (11), RP2040/RP2350 (4), FPGA (2) and STM32 (2).

How big is a typical board using the SN74LVC1T45DBVR?

The median is 110.5 × 56 mm, and 26% are two-layer designs.

What is the most popular open source board using the SN74LVC1T45DBVR?

By GitHub stars, Ovc by osrf, with 207 stars.

Can I simulate one of these boards using the SN74LVC1T45DBVR before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part