74 open source boards using the TPS22918DBVR

Real designs built with the TPS22918DBVR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

74 boardsClear filters|Most starred

How designs wire the TPS22918DBVR

Read from the KiCad layouts of 36 open source designs, one per repository: what each pin of the TPS22918DBVR connects to, and the resistors, capacitors and other passives placed on it.

  • The VIN pin has a decoupling capacitor on 29 of 36 designs, most often 1 µF (then 10 µF).
  • The CT pin has a capacitor to GND on 29 of 36 designs, most often 1 nF (then 10 nF).
  • The VOUT pin has a decoupling capacitor on 29 of 36 designs, most often 100 nF (then 10 µF).
  • The ON pin has a resistor to GND on 23 of 36 designs, most often 100 kΩ (then 10 kΩ).
VINpin 1Connected to: 3.3V 86%
  • Decoupling capacitor on 81% · 1 µF (16), 10 µF (15), 100 nF (6)
GNDpin 2Connected to: GND 97%
ONpin 3Connected to: The microcontroller 42%
  • Resistor to GND on 64% · 100 kΩ (15), 10 kΩ (5), 47 kΩ (1)
CTpin 4Connected to: Signal 89%
  • Capacitor to GND on 81% · 1 nF (8), 10 nF (7), 470 pF (4)
QODpin 5Connected to: Signal 53% · not connected 17% · 3.3V 28%
  • Capacitor to GND on 42% · 100 nF (19), 1 µF (5), 10 µF (5)
  • Series resistor on 33% · 220 Ω (6), 10 kΩ (5), 100 Ω (3)
VOUTpin 6Connected to: 3.3V 53% · a signal 47%
  • Decoupling capacitor on 81% · 100 nF (37), 10 µF (12), 1 µF (6)

Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Moss by metrox-eth, OTTO-Beta-Main by bitfieldaudio, Toern by Soundpauli and Open race v2 by teehee567.

The TPS22918DBVR in open source designs

The gallery holds 74 open source boards using the TPS22918DBVR from 38 GitHub repositories; a typical one measures about 78 × 55.9 mm and carries around 105 components.

89% use four copper layers or more, and 31% carry an open source license.

The most starred is Moss by metrox-eth.

Microcontrollers on boards using the TPS22918DBVR

TPS22918DBVR: common questions

Where can I find a TPS22918DBVR reference design?

Each of the 74 boards on this page is a real design using the TPS22918DBVR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What decoupling capacitors do designs use on the TPS22918DBVR VIN pin?

The VIN pin has a decoupling capacitor on 29 of 36 designs, most often 1 µF (then 10 µF). Counted from the KiCad layouts of 36 open source designs using the TPS22918DBVR.

How is the TPS22918DBVR CT pin connected?

The CT pin has a capacitor to GND on 29 of 36 designs, most often 1 nF (then 10 nF). Counted from the KiCad layouts of 36 open source designs using the TPS22918DBVR.

What decoupling capacitors do designs use on the TPS22918DBVR VOUT pin?

The VOUT pin has a decoupling capacitor on 29 of 36 designs, most often 100 nF (then 10 µF). Counted from the KiCad layouts of 36 open source designs using the TPS22918DBVR.

What parts are used alongside the TPS22918DBVR?

The USBLC6-2SC6, TPS7A2033PDBVR, TPS2553DBVR, TPS3808G01DBVR and AP63203WU-7 appear in the most repositories here.

Which microcontrollers do boards using the TPS22918DBVR use?

Most are built on STM32 (25), ESP32 (23), RP2040/RP2350 (16) and FPGA (2).

How big is a typical board using the TPS22918DBVR?

The median is 78 × 55.9 mm, and 11% are two-layer designs.

What is the most popular open source board using the TPS22918DBVR?

By GitHub stars, Moss by metrox-eth, with 116 stars.

Can I simulate one of these boards using the TPS22918DBVR before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part