Chronos
CedricL1u·Chronos·Electronics/Mechanical Pomodoro Timer.kicad_pcb
About the Chronos PCB
Chronos is an open source ESP32 PCB design by CedricL1u, published on GitHub under the MIT license. It is a 2-layer board measuring 82 × 47.5 mm, with 31 components from 14 distinct parts.
Its main chip is the XIAO-ESP32-C3-DIP, from the ESP32 family. Other key parts include the MAX98357A and PCF8574AT. By type, the board carries 12 resistors, 7 capacitors, 6 connectors, 4 ICs, 1 transistor and 1 diode.
It belongs with the displays & leds, robotics & motion and audio designs in this gallery.
From the project
Chronos is a fully mechanical 7‑segment Pomodoro timer and clock that uses cams, servos, and a custom ESP32‑C3 PCB to create a kinetic, alarm‑equipped display that makes focus sessions more engaging.
Chronos is a 7-Segment mechanical display that is supposed to function as a pomodoro timer, clock, or as a regular timer. It’s equipped with speakers that play an alarm noise when time is up and also random sound effects throughout the timer. The speakers let the user know how many pomodoro cycles they have completed after each cycle. They also help Chronos function as an alarm clock when it is put into clock mode. On the top there are two buttons and a rotary encoder which serve as inputs to control it. Chronos is powered by a ESP32-C3 on a custom PCB that drives all the electronics. This…
Main components on the Chronos
Chronos bill of materials (BOM)
31 components, 14 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | MAX98357A | TQFN-16-1EP_3x3mm_P0.5mm_EP1.23x1.23mm | U1, U3 |
| 1 | XIAO-ESP32-C3-DIP | XIAO-ESP32-C3-SMD | U2 |
| 1 | PCF8574AT | SOIC-16W_7.5x10.3mm_P1.27mm | U4 |
| 1 | AOD403 | TO-252-3_TabPin2 | Q1 |
| 1 | PJ-063BH | CUI_PJ-063BH | J1 |
| 4 | Servo Connector Pin | PinHeader_1x03_P2.54mm_Vertical | J2, J3, J4, J5 |
| 1 | 13 Pin Headers | PinHeader_1x13_P2.54mm_Vertical | J6 |
| 1 | SM5819 | D_SOD-123F | D1 |
| 2 | 10uF | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1, C3 |
| 2 | 0.1uF | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C2, C4 |
| 2 | 0.01uF | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C6, C7 |
| 1 | 2200uF | CAPPRD500W60D1250H2000 | C8 |
| 11 | 10k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R3, R4, R5, R6, R7, R8, R9 +3 |
| 1 | 210k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R2 |
Chronos design files
The KiCad project lives in the CedricL1u/Chronos repository on GitHub; these links point at the commit this page was built from.
Chronos: common questions
What microcontroller does the Chronos use?
The Chronos is built around the XIAO-ESP32-C3-DIP, from the ESP32 family.
How big is the Chronos PCB?
The Chronos measures 82 × 47.5 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Chronos?
31 components, from 14 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Chronos design files?
From the CedricL1u/Chronos repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Chronos design in my own project?
Yes, under the terms of its MIT license, which CedricL1u chose for the repository.
Can I test firmware for the Chronos without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k