Sensor node autorouted
About the Sensor node autorouted PCB
Sensor node autorouted is an open source PCB design by chainstart, published on GitHub. It is a 2-layer board measuring 60 × 38 mm, with 7 components from 7 distinct parts.
Other key parts include the MCU_TQFP32, I2C_SENSOR and 3V3_REG. By type, the board carries 3 ICs, 1 connector, 1 diode, 1 capacitor and 1 resistor.
It belongs with the sensors designs in this gallery.
From the project
MakerAI hardware-agent research, whitepaper, lab artifacts, and MVP pipeline
This directory is an archived MakerAI EDA prototype. It explored:
- optional natural-language to hardwaredsl.json conversion; - deterministic .kicadsch and .kicadpcb` generation; - KiCad ERC/DRC and fabrication exports; - DSN/SES exchange with FreeRouting; and - a separate structured-SVG review drawing.
It is retained for historical reproduction only. Its generated rectangular symbols, passive pin modeling, global-label-per-pin schematic connectivity, and project-specific normalization rules are superseded by the typed specification, evidence, versioned block templates, real KiCad…
Main components on the Sensor node autorouted
Sensor node autorouted bill of materials (BOM)
7 components, 7 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | MCU_TQFP32 | TQFP-32_7x7mm_P0.8mm | U1 |
| 1 | I2C_SENSOR | SOIC-8_3.9x4.9mm_P1.27mm | U2 |
| 1 | 3V3_REG | SOT-223-3_TabPin2 | U3 |
| 1 | POWER_UART | PinHeader_1x04_P2.54mm_Vertical | J1 |
| 1 | LED | LED_0805_2012Metric | D1 |
| 1 | 10uF | C_0805_2012Metric | C1 |
| 1 | 330R | R_0805_2012Metric | R1 |
Sensor node autorouted design files
The KiCad project lives in the chainstart/makerai-lab repository on GitHub; these links point at the commit this page was built from.
Sensor node autorouted: common questions
How big is the Sensor node autorouted PCB?
The Sensor node autorouted measures 60 × 38 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Sensor node autorouted?
7 components, from 7 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Sensor node autorouted design files?
From the chainstart/makerai-lab repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the Sensor node autorouted design in my own project?
The repository has no license, so all rights stay with chainstart. Use it as a reference, and ask the author before reusing the design.
More boards in makerai-lab
P17
43.4 × 46 mm37 parts2LNo license0
Scripted Sensor Node
60 × 38 mm18 parts2LNo license0
ESP32MakerAI ESP32 Smart Pot MVP
100 × 80 mm15 parts2LNo license0
Sensor node ref autorouted
60 × 38 mm7 parts2LNo license0
Makerai sensor node ref autorouted
60 × 38 mm7 parts2LNo license0
Sensor node ref unrouted
60 × 38 mm7 parts2LNo license0
Makerai sensor node ref unrouted
60 × 38 mm7 parts2LNo license0
Sensor node unrouted
60 × 38 mm7 parts2LNo license0
Smart planter unrouted
120 × 100 mm4 parts2LNo license0
Smart planter autorouted
120 × 100 mm4 parts2LNo license0
Clean led kicad10
100 × 60 mm3 parts2LNo license0
Similar boards
Sensor smd
scottbez1
40 × 20 mm5 parts2LApache-2.04.2k
Sensors
StuckAtPrototype
15.2 × 9 mm14 parts4LApache-2.03.8k
Microphone
Mentra-Community
5.5 × 6.1 mm6 parts2LMIT1.2k
TemperaturePCB PANEL
stuartpittaway
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1k
Pots
shanteacontrols
390 × 93 mm75 parts2LApache-2.0956
ButtonsLEDs
390 × 37 mm82 parts2LApache-2.0956