HardLabs

Sensor node ref autorouted

chainstart·makerai-lab·legacy/kicad-script-demo/runs/nl-codex-full-eda/sensor_node_ref_autorouted.kicad_pcb

Sensor node ref autorouted PCB layout, top view — open source board by chainstart

About the Sensor node ref autorouted PCB

Sensor node ref autorouted is an open source PCB design by chainstart, published on GitHub. It is a 2-layer board measuring 60 × 38 mm, with 7 components from 7 distinct parts.

Other key parts include the MCU_TQFP32_PLACEHOLDER, I2C_SENSOR_SOIC8 and AMS1117-3.3. By type, the board carries 3 ICs, 1 connector, 1 diode, 1 capacitor and 1 resistor.

It belongs with the sensors designs in this gallery.

From the project

MakerAI hardware-agent research, whitepaper, lab artifacts, and MVP pipeline

This directory is an archived MakerAI EDA prototype. It explored:

- optional natural-language to hardwaredsl.json conversion; - deterministic .kicadsch and .kicadpcb` generation; - KiCad ERC/DRC and fabrication exports; - DSN/SES exchange with FreeRouting; and - a separate structured-SVG review drawing.

It is retained for historical reproduction only. Its generated rectangular symbols, passive pin modeling, global-label-per-pin schematic connectivity, and project-specific normalization rules are superseded by the typed specification, evidence, versioned block templates, real KiCad…

Main components on the Sensor node ref autorouted

MCU_TQFP32_PLACEHOLDERI2C_SENSOR_SOIC8AMS1117-3.3

Sensor node ref autorouted bill of materials (BOM)

7 components, 7 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
MCU_TQFP32_PLACEHOLDER
U1
1
I2C_SENSOR_SOIC8
U2
1
AMS1117-3.3
U3
1
POWER_UART_1X04
Power_UART
J1
1
LED_GREEN
D1
1
10UF
10uF
C1
1
1k
R1

Sensor node ref autorouted design files

The KiCad project lives in the chainstart/makerai-lab repository on GitHub; these links point at the commit this page was built from.

Sensor node ref autorouted: common questions

How big is the Sensor node ref autorouted PCB?

The Sensor node ref autorouted measures 60 × 38 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Sensor node ref autorouted?

7 components, from 7 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Sensor node ref autorouted design files?

From the chainstart/makerai-lab repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.

Can I use the Sensor node ref autorouted design in my own project?

The repository has no license, so all rights stay with chainstart. Use it as a reference, and ask the author before reusing the design.

More boards in makerai-lab

Similar boards