Arctic-Fox-Light

Cherrytree56567·Arctic-Fox-Light·pcb/arcticfoxlight.kicad_pcb

Arctic-Fox-Light PCB layout, top view — open source ESP32 board by Cherrytree56567

About the Arctic-Fox-Light PCB

Arctic-Fox-Light is an open source ESP32 PCB design by Cherrytree56567, published on GitHub. It is a 2-layer board measuring 32 × 38.5 mm, with 17 components from 12 distinct parts.

Its main chip is the ESP32-C6-MINI-1/U, from the ESP32 family. Other key parts include the LM2596S-5, LM2596S-3.3 and SN74AHCT125N. By type, the board carries 8 resistors, 4 ICs, 3 capacitors, 1 connector and 1 diode.

It belongs with the iot & wireless designs in this gallery.

Main components on the Arctic-Fox-Light

Arctic-Fox-Light bill of materials (BOM)

17 components, 12 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
LM2596S-5
U1
1
ESP32-C6-MINI-1/U
U2
1
LM2596S-3.3
U3
1
SN74AHCT125N
U4
1
USB_C_RECEPTACLE_USB2.0_16P
USB_C_Receptacle_USB2.0_16P
J1
1
WS2812B
D1
2
10UF
10uF
C1, C13
1
100NF
100nF
C12
2
R5.1K
R1, R2
2
R27O
R3, R6
1
R330O
R330o
R7
3
R10K
R10k
R8, R9, R10

Arctic-Fox-Light design files

The KiCad project lives in the Cherrytree56567/Arctic-Fox-Light repository on GitHub; these links point at the commit this page was built from.

Arctic-Fox-Light: common questions

What microcontroller does the Arctic-Fox-Light use?

The Arctic-Fox-Light is built around the ESP32-C6-MINI-1/U, from the ESP32 family.

How big is the Arctic-Fox-Light PCB?

The Arctic-Fox-Light measures 32 × 38.5 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Arctic-Fox-Light?

17 components, from 12 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Arctic-Fox-Light design files?

From the Cherrytree56567/Arctic-Fox-Light repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Arctic-Fox-Light design in my own project?

The repository has no license, so all rights stay with Cherrytree56567. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Arctic-Fox-Light without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

Similar boards