Automatic-License-Plate-Recognition-System pitch and materials
Chibuchi31·Automatic-License-Plate-Recognition-System-pitch-and-materials
About the Automatic-License-Plate-Recognition-System pitch and materials PCB
Automatic-License-Plate-Recognition-System pitch and materials is an open source ESP32 PCB design by Chibuchi31, published on GitHub. It is a 2-layer board measuring 153.5 × 115.5 mm, with 9 components from 7 distinct parts.
Its main chip is the ESP32-WROOM-32, from the ESP32 family. Other key parts include the AMS1117-3.3 and ER_OLEDM0.91_1X-I2C. By type, the board carries 3 ICs, 3 resistors, 2 capacitors and 1 connector.
It belongs with the iot & wireless and displays & leds designs in this gallery.
From the project
IoT-based license plate recognition system using computer vision, OCR, and ESP32.
\# Automatic License Plate Recognition (ALPR) System
IoT-based license plate recognition system using computer vision, OCR, and ESP32-CAM.
This project implements an ALPR system designed for vehicle identification and
crime investigation use cases. It combines an ESP32-based hardware design with
a Python simulation pipeline that detects and reads license plates from images
Main components on the Automatic-License-Plate-Recognition-System pitch and materials
Automatic-License-Plate-Recognition-System pitch and materials bill of materials (BOM)
9 components, 7 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ESP32-WROOM-32 | ESP32-WROOM-32 | U1 |
| 1 | AMS1117-3.3 | SOT-223-3_TabPin2 | U2 |
| 1 | ER_OLEDM0.91_1X-I2C ER_OLEDM0.91_1x-I2C | PinHeader_1x04_P2.54mm_Vertical | U3 |
| 1 | FTDI header | PinHeader_1x04_P1.00mm_Horizontal | J1 |
| 2 | 10UF 10uF | CP_Radial_D5.0mm_P2.00mm | C1, C2 |
| 1 | 10K 10k | R_0805_2012Metric | R1 |
| 2 | 4.7K 4.7k | R_0805_2012Metric | R2, R3 |
Automatic-License-Plate-Recognition-System pitch and materials design files
The KiCad project lives in the Chibuchi31/Automatic-License-Plate-Recognition-System-pitch-and-materials repository on GitHub; these links point at the commit this page was built from.
Automatic-License-Plate-Recognition-System pitch and materials: common questions
What microcontroller does the Automatic-License-Plate-Recognition-System pitch and materials use?
The Automatic-License-Plate-Recognition-System pitch and materials is built around the ESP32-WROOM-32, from the ESP32 family.
How big is the Automatic-License-Plate-Recognition-System pitch and materials PCB?
The Automatic-License-Plate-Recognition-System pitch and materials measures 153.5 × 115.5 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Automatic-License-Plate-Recognition-System pitch and materials?
9 components, from 7 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Automatic-License-Plate-Recognition-System pitch and materials design files?
From the Chibuchi31/Automatic-License-Plate-Recognition-System-pitch-and-materials repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Automatic-License-Plate-Recognition-System pitch and materials design in my own project?
The repository has no license, so all rights stay with Chibuchi31. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Automatic-License-Plate-Recognition-System pitch and materials without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k