Chili utility module hardware
chili-chip·chili-utility-module-hardware
About the Chili utility module hardware
Chili utility module hardware is an open source PCB design by chili-chip, published on GitHub. It is a 2-layer board measuring 16.4 × 14.8 mm, with 15 components from 8 distinct parts.
Other key parts include the LSM6DS3TR-C, RV-3028-C7-32.768kHz-1ppm-TA-QC and DRV2605LDGSR. By type, the board carries 7 capacitors, 4 resistors, 3 ICs and 1 module.
It belongs with the power & battery and sensors designs in this gallery.
From the project
KiCad 10 project for the chilichip utility module: a small add-on board for the chilichip console with a gyroscope/accelerometer, a vibration motor and a real-time clock. Everything sits on one I²C bus, so the module needs only the console's three free GPIOs. The RTC is backed by
KiCad 10 project for the chilichip utility module: a small add-on board for the chilichip console with a gyroscope/accelerometer, a vibration motor and a real-time clock. Everything sits on one I²C bus, so the module needs only the console's three free GPIOs. The RTC is backed by the console's LiPo through its VSYS rail.
Status: v2.0.0, schematic and PCB done. The board is routed, DRC is clean (0 violations, 0 unconnected, matches the schematic), and ERC is clean.

Main components on the Chili utility module hardware
Chili utility module hardware bill of materials (BOM)
15 components, 8 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | LSM6DS3TR-C STMicroelectronics | LGA-14_3x2.5mm_P0.5mm_LayoutBorder3x4y | U1 |
| 1 | RV-3028-C7-32.768kHz-1ppm-TA-QC RV-3028-C7 Micro Crystal | MicroCrystal_C7_SON-8_1.5x3.2mm_P0.9mm | U2 |
| 1 | DRV2605LDGSR DRV2605L Texas Instruments | TSSOP-10_3x3mm_P0.5mm | U3 |
| 1 | VZ43FC1B5640007L Vybronics | Motor_ERM_SMD_Vybronics_VZ43FC1B | M1 |
| 5 | CL05B104KO5NNNC 100nF Samsung Electro-Mechanics | C_0402_1005Metric | C1, C2, C3, C4, C6 |
| 2 | CL05A105KA5NQNC 1uF Samsung Electro-Mechanics | C_0402_1005Metric | C5, C7 |
| 2 | 0402WGF4701TCE 4.7k UNI-ROYAL | R_0402_1005Metric | R1, R2 |
| 2 | 0402WGF1002TCE 10k UNI-ROYAL | R_0402_1005Metric | R3, R4 |
Chili utility module hardware design files
The KiCad project lives in the chili-chip/chili-utility-module-hardware repository on GitHub; these links point at the commit this page was built from.
- Layoutchili-utility-module.kicad_pcb
- Schematicchili-utility-module.kicad_sch
- BOMREADME.md
Chili utility module hardware: common questions
How big is the Chili utility module hardware?
The Chili utility module hardware measures 16.4 × 14.8 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Chili utility module hardware?
15 components, from 8 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Chili utility module hardware design files?
From the chili-chip/chili-utility-module-hardware repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Chili utility module hardware design in my own project?
The repository has no license, so all rights stay with chili-chip. Use it as a reference, and ask the author before reusing the design.
Similar boards
Sensor smd
scottbez1
40 × 20 mm5 parts2LApache-2.04.2kSensors
StuckAtPrototype
15.2 × 9 mm14 parts4LApache-2.03.8kEinkPDA screen
TalismanDesign
95 × 54 mm27 parts2LApache-2.02.0kStack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kDisplay Carrier
AxxAxx
35.6 × 58.2 mm5 parts2LGPL-3.01.7kMicrophone
Mentra-Community
5.5 × 6.1 mm6 parts2LMIT1.2k