Pokepico hardware MFT2019
About the Pokepico hardware MFT2019 PCB
Pokepico hardware MFT2019 is an open source ESP32 PCB design by chip-da-tunetaro, published on GitHub. It is a 2-layer board measuring 90 × 60 mm, with 54 components from 27 distinct parts.
Its main chip is the ESP32-DEVKITC, from the ESP32 family. Other key parts include the 4040, LMV324 and PJ-325. By type, the board carries 19 resistors, 9 test points, 8 capacitors, 6 ICs, 4 connectors and 3 diodes.
From the project
pokepico rev.1のハードウェア
Main components on the Pokepico hardware MFT2019
Pokepico hardware MFT2019 bill of materials (BOM)
54 components, 27 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ESP32-DEVKITC | ESP32-DEVKITC | U1 |
| 1 | 4040 | DIP-16_W7.62mm_Socket | U2 |
| 2 | LMV324 | SOIC-14_3.9x8.7mm_P1.27mm | U3, U4 |
| 2 | PJ-325 | PJ-325 | U5, U6 |
| 1 | CXO_DIP8 | Oscillator_DIP-8 | X1 |
| 1 | microbit_edge_connector | 4UCON_10156_2x40_P1.27mm_Socket_Horizontal | J1 |
| 1 | Conn_01x02_Male | JST_PH_B2B-PH-K_1x02_P2.00mm_Vertical | J2 |
| 1 | I2C | PinHeader_1x04_P2.54mm_Vertical | J3 |
| 1 | POWERPOINT | PinHeader_1x02_P2.54mm_Vertical | J4 |
| 1 | SW_Push | PG1350 | SW1 |
| 1 | FLOW_L_ALT | TestPoint_Loop_D1.80mm_Drill1.0mm_Beaded | TP1 |
| 1 | FLOW_R_ALT | TestPoint_Loop_D1.80mm_Drill1.0mm_Beaded | TP2 |
| 1 | BIAS | TestPoint_Loop_D1.80mm_Drill1.0mm_Beaded | TP3 |
| 1 | OUT_R_ALT | TestPoint_Loop_D1.80mm_Drill1.0mm_Beaded | TP4 |
| 1 | LEFT_OUT | TestPoint_Loop_D1.80mm_Drill1.0mm_Beaded | TP5 |
| 1 | OUT_L_ALT | TestPoint_Loop_D1.80mm_Drill1.0mm_Beaded | TP6 |
| 1 | AMP_L_ALT | TestPoint_Loop_D1.80mm_Drill1.0mm_Beaded | TP7 |
| 1 | RIGHT_OUT | TestPoint_Loop_D1.80mm_Drill1.0mm_Beaded | TP8 |
| 1 | AMP_R_ALT | TestPoint_Loop_D1.80mm_Drill1.0mm_Beaded | TP9 |
| 2 | RK0972A503L15F | RK0972A503L15F | VR1, VR2 |
Show 7 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | LOGO | chip | gg1 |
| 3 | LED | LED_D3.0mm | D1, D2, D3 |
| 1 | 1n | C_Disc_D3.0mm_W1.6mm_P2.50mm | C1 |
| 1 | 0.1u | C_Disc_D3.0mm_W1.6mm_P2.50mm | C2 |
| 6 | C | C_Disc_D3.8mm_W2.6mm_P2.50mm | C3, C4, C5, C6, C7, C8 |
| 18 | R | R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R1, R2, R3, R4, R5, R6, R7, R8 +10 |
| 1 | MNR04MRAPJ103 | RESCAX50P100X200X36-8N | RN1 |
Pokepico hardware MFT2019 design files
The KiCad project lives in the chip-da-tunetaro/pokepico_hardware_MFT2019 repository on GitHub; these links point at the commit this page was built from.
Pokepico hardware MFT2019: common questions
What microcontroller does the Pokepico hardware MFT2019 use?
The Pokepico hardware MFT2019 is built around the ESP32-DEVKITC, from the ESP32 family.
How big is the Pokepico hardware MFT2019 PCB?
The Pokepico hardware MFT2019 measures 90 × 60 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Pokepico hardware MFT2019?
54 components, from 27 distinct parts. The full bill of materials is listed on this page.
Where can I download the Pokepico hardware MFT2019 design files?
From the chip-da-tunetaro/pokepico_hardware_MFT2019 repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Pokepico hardware MFT2019 design in my own project?
The repository has no license, so all rights stay with chip-da-tunetaro. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Pokepico hardware MFT2019 without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32Open Book Abridged Edition
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1k
ESP32Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0k
ESP32Esp32 minimal
36.2 × 26.8 mm20 parts2LMIT4.0k
ESP32Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8k
ESP32Controller
29 × 74 mm58 parts4LApache-2.03.8k
ESP32Bitaxe
skot
56.5 × 99.8 mm86 parts4LCERN-OHL-S-2.01.4k