Tamagochi boy chain

Chrif16·tamagochi-boy-chain·PCB/my pcb.kicad_pcb

Tamagochi boy chain PCB layout, top view — open source ESP32 board by Chrif16

About the Tamagochi boy chain PCB

Tamagochi boy chain is an open source ESP32 PCB design by Chrif16, published on GitHub. It is a 2-layer board measuring 119.9 × 102.7 mm, with 8 components from 7 distinct parts.

Its main chip is the XIAO-ESP32-C3-SMD, from the ESP32 family. Other key parts include the DHT11. By type, the board carries 2 ICs, 2 connectors, 2 switches and 1 resistor.

It belongs with the sensors and displays & leds designs in this gallery.

From the project

it turned out just like how i imagined it its so sick

it turned out just like how i imagined it its so sick

For screws and similar items, it is recommended to find the cheapest in your location. first 3d print all the parts in the cad folder except for the assembly, buy the pcb, flash the esp32, solder all the components on your pcb,charge your battery and put it in its spot, put your finished pcb inside the case and screw it shut and voila # Zine

Tamagochi boy chain, from the project README
From the project README

Main components on the Tamagochi boy chain

Tamagochi boy chain bill of materials (BOM)

8 components, 7 distinct parts.

QtyPartRefs
1
XIAO-ESP32-C3-SMD
U1
1
DHT11
U2
1
Conn_01x07_Pin
J1
1
Conn_01x08_Pin
J2
1
BAT-HLD-001
B1
2
SW_Push
SW1, SW2
1
10K
R1

Tamagochi boy chain design files

The KiCad project lives in the Chrif16/tamagochi-boy-chain repository on GitHub; these links point at the commit this page was built from.

Tamagochi boy chain: common questions

What microcontroller does the Tamagochi boy chain use?

The Tamagochi boy chain is built around the XIAO-ESP32-C3-SMD, from the ESP32 family.

How big is the Tamagochi boy chain PCB?

The Tamagochi boy chain measures 119.9 × 102.7 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Tamagochi boy chain?

8 components, from 7 distinct parts. The full bill of materials is listed on this page.

Where can I download the Tamagochi boy chain design files?

From the Chrif16/tamagochi-boy-chain repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Tamagochi boy chain design in my own project?

The repository has no license, so all rights stay with Chrif16. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Tamagochi boy chain without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

Similar boards