Smart coaster

chupachupbum·smart-coaster·hardware/smart_cup_stand_pcb/smart_cup_stand_pcb.kicad_pcb

Smart coaster PCB layout, top view — open source ESP32 board by chupachupbum

About the Smart coaster PCB

Smart coaster is an open source ESP32 PCB design by chupachupbum, published on GitHub. It is a 2-layer board measuring 50 × 40 mm, with 31 components from 16 distinct parts.

Its main chip is the C2934560, from the ESP32 family. Other key parts include the C6186 and C43656. By type, the board carries 11 capacitors, 11 resistors, 3 ICs, 3 connectors, 2 switches and 1 transistor.

It belongs with the displays & leds and iot & wireless designs in this gallery.

From the project

Firmware, Wokwi hardware simulations, and a custom 2-layer KiCad 10 PCB for an ESP32-C3 / ESP32 hydration tracking coaster. Instead of Time-of-Flight (ToF) distance sensors that only detect whether a bottle was picked up, this system uses a 4-cell Wheatstone bridge load cell and

Firmware, Wokwi hardware simulations, and a custom 2-layer KiCad 10 PCB for an ESP32-C3 / ESP32 hydration tracking coaster. Instead of Time-of-Flight (ToF) distance sensors that only detect whether a bottle was picked up, this system uses a 4-cell Wheatstone bridge load cell and HX711 24-bit ADC to measure beverage mass deltas. It separates real drinks from fidget lifts and refills while driving an SSD1306 OLED UI, PWM or WS2812 NeoPixel ring LED alerts, UART JSON telemetry, and ntfy.sh HTTP push notifications.

Smart coaster, from the project README
From the project README

Main components on the Smart coaster

Smart coaster bill of materials (BOM)

31 components, 16 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
C2934560
ESP32-C3-WROOM-02
U1
1
C6186
AMS1117-3.3
U2
1
C43656
HX711
U3
1
C2145
SS8550
Q1
1
C165948
TYPE-C-31-M-12
J1
1
C22325128
Conn_01x04_Pin
J2
1
C492401
Conn_01x03_Pin
J3
2
C318884
SW_Push
SW1, SW2
4
C15850
10uF
C1, C2, C3, C4
7
C14663
100nF
C5, C6, C7, C8, C9, C10, C11
2
C23186
5.1k
R1, R2
4
C25804
10k
R3, R4, R5, R6
1
C23138
330
R7
1
C4184
20k
R8
1
C23254
8.2k
R9
2
C22775
100
R10, R11

Smart coaster design files

The KiCad project lives in the chupachupbum/smart-coaster repository on GitHub; these links point at the commit this page was built from.

Smart coaster: common questions

What microcontroller does the Smart coaster use?

The Smart coaster is built around the C2934560, from the ESP32 family.

How big is the Smart coaster PCB?

The Smart coaster measures 50 × 40 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Smart coaster?

31 components, from 16 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Smart coaster design files?

From the chupachupbum/smart-coaster repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Smart coaster design in my own project?

The repository has no license, so all rights stay with chupachupbum. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Smart coaster without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

Similar boards