23 open source boards using the MCP1416
Real designs built with the MCP1416, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32
Td deflect
tdaede
174 × 104 mm165 parts4LNo license370STM32
Leviathan
MotorDynamicsLab
170 × 100 mm406 parts4LGPL-3.0121Poncho MIDI
ciaa
85.8 × 137 mm126 parts2LNo license15AVR/Arduino
Highpower controller
pypilot
116 × 86.4 mm168 parts4LNo license3ESP32
Fis
nicolasfara
106.7 × 69.1 mm41 parts2LGPL-3.03ESP32
Signalbroker lin transceiver
skyguru
105 × 63 mm29 parts2LApache-2.03RP2040/RP2350
Piaa
soypat
98.6 × 53.8 mm104 parts2LGPL-2.02ESP32
Bobbycar boardcomputer hardware
bobbycar-graz
42 × 45 mm66 parts2LNo license2StepperMotorController
efebasol
162.8 × 117.8 mm85 parts2LNo license0ESP32
Hotplate
Keyaan-07
60 × 45 mm74 parts4LMIT0HVGene-OpenHardware
Teille98
94.8 × 57.5 mm33 parts2LNo license03v-48v mosfet driver
1ln
88.3 × 48 mm30 parts2LNo license0Relay-Board
SeniorDesign-2024
101.6 × 101.6 mm18 parts2LNo license0PONCHO PLC
ciaa
150 × 100 mm116 parts2LNo license15AVR/Arduino
Midpower controller
pypilot
103.4 × 71.6 mm142 parts4LNo license3STM32
Pneu pwr brd 11 19 25
lbrosnan1
65 × 65 mm75 parts4LNo license2Forge launcher
ericpearson1313
109 × 115 mm218 parts6LNo license0STM32
Psu
adamgreig
100 × 100 mm137 parts2LNo license0Td hv
tdaede
90 × 71 mm60 parts2LNo license370EDU-CIAA-NXP Port's Expander - Circuito Impreso
ciaa
86 × 137 mm56 parts2LNo license15ESP8266
Detector de caídas
ciaa
85.7 × 137.2 mm40 parts2LNo license15Poncho Edu CIAA - Esquemático Jerarquico
ciaa
86 × 137.3 mm34 parts2LNo license15Poncho Misión SAEv2
ciaa
85.9 × 80 mm13 parts2LNo license15
How designs wire the MCP1416
Read from the KiCad layouts of 15 open source designs, one per repository: what each pin of the MCP1416 connects to, and the resistors, capacitors and other passives placed on it.
- The VDD pin has a decoupling capacitor on 9 of 15 designs, most often 100 nF (then 1 µF).
- The OUT pin has a series resistor on 6 of 15 designs, most often 330 Ω (then 1 Ω).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| NCpin 1 | Connected to: Not connected 87% | — |
| VDDpin 2 | Connected to: 12V 93% |
|
| GNDpin 4 | Connected to: GND 93% | — |
| OUTpin 5 | Connected to: Signal 100% |
|
1 more pin varies from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Td deflect by tdaede, Leviathan by MotorDynamicsLab, EDU-CIAA-NXP Port's Expander - Circuito Impreso by ciaa and Fis by nicolasfara.
The MCP1416 in open source designs
The gallery holds 23 open source boards using the MCP1416 from 16 GitHub repositories; a typical one measures about 98.6 × 86.4 mm and carries around 74 components.
70% are two-layer designs, the rest use four layers or more, and 22% carry an open source license.
The most starred is Td deflect by tdaede.
Parts used alongside the MCP1416
Microcontrollers on boards using the MCP1416
What boards using the MCP1416 are built for
MCP1416: common questions
Where can I find a MCP1416 reference design?
Each of the 23 boards on this page is a real design using the MCP1416. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the MCP1416 VDD pin?
The VDD pin has a decoupling capacitor on 9 of 15 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 15 open source designs using the MCP1416.
What resistor goes on the MCP1416 OUT pin?
The OUT pin has a series resistor on 6 of 15 designs, most often 330 Ω (then 1 Ω). Counted from the KiCad layouts of 15 open source designs using the MCP1416.
Which microcontrollers do boards using the MCP1416 use?
Most are built on ESP32 (4), STM32 (4), AVR/Arduino (2) and ESP8266 (1).
How big is a typical board using the MCP1416?
The median is 98.6 × 86.4 mm, and 70% are two-layer designs.
What is the most popular open source board using the MCP1416?
By GitHub stars, Td deflect by tdaede, with 370 stars.
Can I simulate one of these boards using the MCP1416 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.