Sapling
claire-yuan-xi·sapling·pcb/sapling/sapling.kicad_pcb
About the Sapling PCB
Sapling is an open source ESP32 PCB design by claire-yuan-xi, published on GitHub. It is a 2-layer board measuring 78.8 × 78.8 mm, with 6 components from 4 distinct parts.
Its main chip is the XIAO-ESP32-C3-SMD, from the ESP32 family. Other key parts include the HS96L03W2C03. By type, the board carries 3 switches, 2 ICs and 1 battery holder.
It belongs with the displays & leds and power & battery designs in this gallery.
From the project
Sapling is a Tamagotchi-style virtual pet that's a little potted tree. Its pixel "sapling spirit" grows from a seed → sprout → sapling → young tree → old tree depending on how well you take care of it. The long-term goal is a self-standing potted-tree case with a solar cell in th
Sapling is a Tamagotchi-style virtual pet that's a little potted tree. Its pixel "sapling spirit" grows from a seed → sprout → sapling → young tree → old tree depending on how well you take care of it. The long-term goal is a self-standing potted-tree case with a solar cell in the canopy, so the pet literally lives on sunlight.
Press any button to wake it up. The screen shows the tree's stage and its water, soil, and mood bars. Every 5 minutes it wakes on its own to get a little thirstier, and sometimes a pest shows up. Keep its mood above 50% and it grows a stage after 1, 5, 14, and 30…

Main components on the Sapling
Sapling bill of materials (BOM)
6 components, 4 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | XIAO-ESP32-C3-SMD | XIAO-ESP32-C3 | U1 |
| 1 | HS96L03W2C03 OLED-0.96in-I2C HS(汉昇) | OLED-0.96in-I2C | U2 |
| 1 | Battery_Cell | PinHeader_1x02_P2.54mm_Vertical | BT1 |
| 3 | SW_Push | SW_PUSH_6mm | SW1, SW2, SW3 |
Sapling design files
The KiCad project lives in the claire-yuan-xi/sapling repository on GitHub; these links point at the commit this page was built from.
- Layoutpcb/sapling/sapling.kicad_pcb
- Schematicpcb/sapling/sapling.kicad_sch
Sapling: common questions
What microcontroller does the Sapling use?
The Sapling is built around the XIAO-ESP32-C3-SMD, from the ESP32 family.
How big is the Sapling PCB?
The Sapling measures 78.8 × 78.8 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Sapling?
6 components, from 4 distinct parts. The full bill of materials is listed on this page.
Where can I download the Sapling design files?
From the claire-yuan-xi/sapling repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Sapling design in my own project?
The repository has no license, so all rights stay with claire-yuan-xi. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Sapling without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k