Glitch

cloudglides·glitch·pcb/glitch.kicad_pcb

Glitch PCB layout, top view — open source ESP32 board by cloudglides

About the Glitch PCB

Glitch is an open source ESP32 PCB design by cloudglides, published on GitHub. It is a 2-layer board measuring 80 × 100 mm, with 48 components from 26 distinct parts.

Its main chip is the ESP32-C3-WROOM-02-N4, from the ESP32 family. Other key parts include the ME6211C33 and TP4054. By type, the board carries 14 capacitors, 11 resistors, 8 switches, 6 LEDs, 3 ICs and 3 connectors.

It belongs with the iot & wireless, displays & leds and power & battery designs in this gallery.

From the project

GLITCH is a lanyard badge in the style of the tech-conference PCB badges, built around an ESP32-C3 with an OLED display, 5 buttons and a row of RGB LEDs, running off a LiPo that charges over USB-C.

GLITCH is a lanyard badge in the style of the tech-conference PCB badges, built around an ESP32-C3 with an OLED display, 5 buttons and a row of RGB LEDs, running off a LiPo that charges over USB-C.

the front is the part you look at: the silkscreen art, the LEDs, the display and the buttons. all the actual electronics live on the back, along with a spot to tape the battery.

Glitch, from the project README
From the project README

Main components on the Glitch

Glitch bill of materials (BOM)

48 components, 26 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
ESP32-C3-WROOM-02-N4
U1
1
ME6211C33
U2
1
TP4054
U3
1
AO3401A
Q1
1
C165948
USB-C 16P
J1
1
C295747
LiPo JST-PH
J2
1
C2718488
OLED GND/VCC/SCL/SDA
J3
1
C318884
A
SW1
1
C318884
B
SW2
1
C318884
C
SW3
1
C318884
UP
SW4
1
C318884
DOWN
SW5
1
C318884
RESET
SW6
1
C318884
BOOT
SW7
1
C431540
POWER
SW8
6
WS2812B
LED1, LED2, LED3, LED4, LED5, LED6
1
B5819W
D1
1
C2286
CHG red
D2
5
10UF
10uF
C1, C2, C3, C4, C6
8
100NF
100nF
C5, C7, C9, C10, C11, C12, C13, C14
Show 6 more
QtyPartRefs
1
1UF
1uF
C8
3
5.1K
5.1k
R1, R2, R4
1
100K
100k
R3
1
1k
R5
4
10K
10k
R6, R7, R8, R9
2
4.7K
4.7k
R10, R11

Glitch design files

The KiCad project lives in the cloudglides/glitch repository on GitHub; these links point at the commit this page was built from.

Glitch: common questions

What microcontroller does the Glitch use?

The Glitch is built around the ESP32-C3-WROOM-02-N4, from the ESP32 family.

How big is the Glitch PCB?

The Glitch measures 80 × 100 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Glitch?

48 components, from 26 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Glitch design files?

From the cloudglides/glitch repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Glitch design in my own project?

The repository has no license, so all rights stay with cloudglides. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Glitch without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

Similar boards