ANALOG MODULE
CodapopKSP·UntitledSpaceCraft·PCBs/Source/Analog_Module/Analog_Module.kicad_pcb
About the ANALOG MODULE
ANALOG MODULE is an open source PCB design by CodapopKSP, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 51.8 × 52.8 mm, with 32 components from 5 distinct parts.
Other key parts include the 74HC165. By type, the board carries 7 resistors, 2 capacitors and 1 IC.
From the project
The entire project files from the Untitled Space Craft brand of Kerbal controllers.
Untitled Space Craft is a modular controller system originally developed by Codapop. For build instructions and information, check the releases for updated documentation.
This project is licensed under the GNU General Public License v3.0 (GPL-3.0).
While you are free to use, modify, and redistribute the files in this project under the terms of the GPL-3.0, please note the following restrictions regarding commercial use:
Main components on the ANALOG MODULE
ANALOG MODULE bill of materials (BOM)
32 components, 5 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 74HC165 | DIP-16_L20.0-W6.4-P2.54-LS7.6-BL | U4 |
| 6 | WirePad | WirePad | TP_+5V, TP_AXIS1, TP_AXIS2, TP_AXIS3, TP_MODE1, TP_MODE2 |
| 16 | WPAD-1-30AWG | WPAD-1-PTH-30AWG | WP11, WP24, WP25, WP38, WP39, WP43, WP44, WP45 +8 |
| 2 | C104 | TH_CAP_5mm | C1, C4 |
| 7 | - 10K | TH_RES_10mm | R1, R2, R3, R4, R5, R6, R7 |
ANALOG MODULE design files
The KiCad project lives in the CodapopKSP/UntitledSpaceCraft repository on GitHub; these links point at the commit this page was built from.
ANALOG MODULE: common questions
How big is the ANALOG MODULE?
The ANALOG MODULE measures 51.8 × 52.8 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the ANALOG MODULE?
32 components, from 5 distinct parts. The full bill of materials is listed on this page.
Where can I download the ANALOG MODULE design files?
From the CodapopKSP/UntitledSpaceCraft repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the ANALOG MODULE design in my own project?
Yes, under the terms of its GPL-3.0 license, which CodapopKSP chose for the repository.
More boards in UntitledSpaceCraft
2X4 HUB
CodapopKSP
91.5 × 45 mm129 parts2LGPL-3.037AVR/Arduino
CONTROL SYSTEMS MODULE
CodapopKSP
13 × 14 mm94 parts2LGPL-3.037AVR/Arduino
ACTION MODULE
CodapopKSP
13 × 14 mm88 parts2LGPL-3.037AVR/Arduino
EXECUTIVE ACTIONS (GROUPS/CONTROL) MODULE
CodapopKSP
20 × 20 mm60 parts2LGPL-3.037AVR/Arduino
EVA MODULE
CodapopKSP
13 × 14 mm57 parts2LGPL-3.037AVR/Arduino
UTILITY (NAVIGATION) MODULE
CodapopKSP
28 × 28 mm55 parts2LGPL-3.037AVR/Arduino
UTILITY TIME MODULE
CodapopKSP
13 × 14 mm53 parts2LGPL-3.037AVR/Arduino
CAMERA MODULE
CodapopKSP
13 × 14 mm46 parts2LGPL-3.037AVR/Arduino
NAVIGATION (TIME) MODULE
CodapopKSP
25 × 32 mm41 parts2LGPL-3.037AVR/Arduino
NAVIGATION MODULE
CodapopKSP
28 × 28 mm41 parts2LGPL-3.037ANALOG THROTTLE MODULE
CodapopKSP
51.8 × 52.8 mm32 parts2LGPL-3.037