HardLabs

ACTION MODULE

CodapopKSP·UntitledSpaceCraft·PCBs/Source/Action_Groups_Module/Action_Groups_Module.kicad_pcb

ACTION MODULE layout, top view — open source AVR/Arduino board by CodapopKSP
Simulate this board

About the ACTION MODULE

ACTION MODULE is an open source AVR/Arduino PCB design by CodapopKSP, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 13 × 14 mm, with 88 components from 7 distinct parts.

Its main chip is the ATtiny45, from the AVR/Arduino family. Other key parts include the 74HC165 and 74HC595. By type, the board carries 20 resistors, 6 ICs and 6 capacitors.

From the project

The entire project files from the Untitled Space Craft brand of Kerbal controllers.

Untitled Space Craft is a modular controller system originally developed by Codapop. For build instructions and information, check the releases for updated documentation.

This project is licensed under the GNU General Public License v3.0 (GPL-3.0).

While you are free to use, modify, and redistribute the files in this project under the terms of the GPL-3.0, please note the following restrictions regarding commercial use:

Main components on the ACTION MODULE

ATtiny4574HC16574HC595

ACTION MODULE bill of materials (BOM)

88 components, 7 distinct parts.

QtyPartRefs
2
ATtiny45
U1, U2
2
74HC165
U3, U4
2
74HC595
U5, U6
56
WPAD-1-30AWG
WP41, WP42, WP43, WP44, WP45, WP46, WP47, WP48 +48
6
C104
C1, C2, C3, C4, C5, C6
10
- 10K
R1, R2, R3, R4, R5, R6, R7, R8 +2
10
- 62K
R11, R12, R13, R14, R15, R16, R17, R18 +2

ACTION MODULE design files

The KiCad project lives in the CodapopKSP/UntitledSpaceCraft repository on GitHub; these links point at the commit this page was built from.

ACTION MODULE: common questions

What microcontroller does the ACTION MODULE use?

The ACTION MODULE is built around the ATtiny45, from the AVR/Arduino family.

How big is the ACTION MODULE?

The ACTION MODULE measures 13 × 14 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the ACTION MODULE?

88 components, from 7 distinct parts. The full bill of materials is listed on this page.

Where can I download the ACTION MODULE design files?

From the CodapopKSP/UntitledSpaceCraft repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the ACTION MODULE design in my own project?

Yes, under the terms of its GPL-3.0 license, which CodapopKSP chose for the repository.

Can I test firmware for the ACTION MODULE without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.

More boards in UntitledSpaceCraft

Similar boards