HardLabs

NAVIGATION (TIME) MODULE

CodapopKSP·UntitledSpaceCraft·PCBs/Source/Navigation_Time_Module/Navigation_Time_Module.kicad_pcb

NAVIGATION (TIME) MODULE layout, top view — open source AVR/Arduino board by CodapopKSP
Simulate this board

About the NAVIGATION (TIME) MODULE

NAVIGATION (TIME) MODULE is an open source AVR/Arduino PCB design by CodapopKSP, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 25 × 32 mm, with 41 components from 8 distinct parts.

Its main chip is the ATtiny25, from the AVR/Arduino family. Other key parts include the 74HC165. By type, the board carries 10 resistors, 3 ICs and 3 capacitors.

From the project

The entire project files from the Untitled Space Craft brand of Kerbal controllers.

Untitled Space Craft is a modular controller system originally developed by Codapop. For build instructions and information, check the releases for updated documentation.

This project is licensed under the GNU General Public License v3.0 (GPL-3.0).

While you are free to use, modify, and redistribute the files in this project under the terms of the GPL-3.0, please note the following restrictions regarding commercial use:

Main components on the NAVIGATION (TIME) MODULE

ATtiny2574HC165

NAVIGATION (TIME) MODULE bill of materials (BOM)

41 components, 8 distinct parts.

QtyPartRefs
2
ATtiny25
U1, U3
1
74HC165
U2
9
WirePad
TP_+5V, TP_T1, TP_T2, TP_T3, TP_T4, TP_T5, TP_T6, TP_T7 +1
16
WPAD-1-30AWG
WP1, WP2, WP3, WP4, WP5, WP6, WP7, WP8 +8
3
C104
C1, C2, C3
8
- 10K
R1, R2, R3, R4, R5, R6, R7, R8
1
- 300
R9
1
- 1.5K
R10

NAVIGATION (TIME) MODULE design files

The KiCad project lives in the CodapopKSP/UntitledSpaceCraft repository on GitHub; these links point at the commit this page was built from.

NAVIGATION (TIME) MODULE: common questions

What microcontroller does the NAVIGATION (TIME) MODULE use?

The NAVIGATION (TIME) MODULE is built around the ATtiny25, from the AVR/Arduino family.

How big is the NAVIGATION (TIME) MODULE?

The NAVIGATION (TIME) MODULE measures 25 × 32 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the NAVIGATION (TIME) MODULE?

41 components, from 8 distinct parts. The full bill of materials is listed on this page.

Where can I download the NAVIGATION (TIME) MODULE design files?

From the CodapopKSP/UntitledSpaceCraft repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the NAVIGATION (TIME) MODULE design in my own project?

Yes, under the terms of its GPL-3.0 license, which CodapopKSP chose for the repository.

Can I test firmware for the NAVIGATION (TIME) MODULE without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.

More boards in UntitledSpaceCraft

Similar boards