HardLabs

EXECUTIVE ACTIONS (GROUPS/CONTROL) MODULE

CodapopKSP·UntitledSpaceCraft·PCBs/Source/Executive_Actions_G_C_Module/Executive_Actions_G_C_Module.kicad_pcb

EXECUTIVE ACTIONS (GROUPS/CONTROL) MODULE layout, top view — open source AVR/Arduino board by CodapopKSP
Simulate this board

About the EXECUTIVE ACTIONS (GROUPS/CONTROL) MODULE

EXECUTIVE ACTIONS (GROUPS/CONTROL) MODULE is an open source AVR/Arduino PCB design by CodapopKSP, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 20 × 20 mm, with 60 components from 11 distinct parts.

Its main chip is the ATtiny45, from the AVR/Arduino family. Other key parts include the 74HC595 and 74HC165. By type, the board carries 13 resistors, 4 ICs and 4 capacitors.

From the project

The entire project files from the Untitled Space Craft brand of Kerbal controllers.

Untitled Space Craft is a modular controller system originally developed by Codapop. For build instructions and information, check the releases for updated documentation.

This project is licensed under the GNU General Public License v3.0 (GPL-3.0).

While you are free to use, modify, and redistribute the files in this project under the terms of the GPL-3.0, please note the following restrictions regarding commercial use:

Main components on the EXECUTIVE ACTIONS (GROUPS/CONTROL) MODULE

ATtiny4574HC59574HC165

EXECUTIVE ACTIONS (GROUPS/CONTROL) MODULE bill of materials (BOM)

60 components, 11 distinct parts.

QtyPartRefs
2
ATtiny45
U1, U2
1
74HC595
U3
1
74HC165
U4
1
WirePad
TP_+5V
38
WPAD-1-30AWG
WP1, WP2, WP3, WP4, WP5, WP6, WP7, WP8 +30
4
C104
C1, C2, C3, C4
1
- 1.2K
R1
8
- 10K
R2, R3, R5, R9, R10, R11, R12, R13
1
-62/10K
R4
1
- 62/10K
R6
2
- 62K
R7, R8

EXECUTIVE ACTIONS (GROUPS/CONTROL) MODULE design files

The KiCad project lives in the CodapopKSP/UntitledSpaceCraft repository on GitHub; these links point at the commit this page was built from.

EXECUTIVE ACTIONS (GROUPS/CONTROL) MODULE: common questions

What microcontroller does the EXECUTIVE ACTIONS (GROUPS/CONTROL) MODULE use?

The EXECUTIVE ACTIONS (GROUPS/CONTROL) MODULE is built around the ATtiny45, from the AVR/Arduino family.

How big is the EXECUTIVE ACTIONS (GROUPS/CONTROL) MODULE?

The EXECUTIVE ACTIONS (GROUPS/CONTROL) MODULE measures 20 × 20 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the EXECUTIVE ACTIONS (GROUPS/CONTROL) MODULE?

60 components, from 11 distinct parts. The full bill of materials is listed on this page.

Where can I download the EXECUTIVE ACTIONS (GROUPS/CONTROL) MODULE design files?

From the CodapopKSP/UntitledSpaceCraft repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the EXECUTIVE ACTIONS (GROUPS/CONTROL) MODULE design in my own project?

Yes, under the terms of its GPL-3.0 license, which CodapopKSP chose for the repository.

Can I test firmware for the EXECUTIVE ACTIONS (GROUPS/CONTROL) MODULE without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.

More boards in UntitledSpaceCraft

Similar boards