HardLabs

UTILITY (NAVIGATION) MODULE

CodapopKSP·UntitledSpaceCraft·PCBs/Source/Utility_Navigation_Module/Utility_Navigation_Module.kicad_pcb

UTILITY (NAVIGATION) MODULE layout, top view — open source AVR/Arduino board by CodapopKSP
Simulate this board

About the UTILITY (NAVIGATION) MODULE

UTILITY (NAVIGATION) MODULE is an open source AVR/Arduino PCB design by CodapopKSP, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 28 × 28 mm, with 55 components from 9 distinct parts.

Its main chip is the ATtiny45, from the AVR/Arduino family. Other key parts include the 74HC165 and 74HC595. By type, the board carries 19 resistors, 5 ICs and 5 capacitors.

From the project

The entire project files from the Untitled Space Craft brand of Kerbal controllers.

Untitled Space Craft is a modular controller system originally developed by Codapop. For build instructions and information, check the releases for updated documentation.

This project is licensed under the GNU General Public License v3.0 (GPL-3.0).

While you are free to use, modify, and redistribute the files in this project under the terms of the GPL-3.0, please note the following restrictions regarding commercial use:

Main components on the UTILITY (NAVIGATION) MODULE

ATtiny4574HC16574HC595

UTILITY (NAVIGATION) MODULE bill of materials (BOM)

55 components, 9 distinct parts.

QtyPartRefs
2
ATtiny45
U1, U2
1
74HC165
U3
2
74HC595
U5, U6
10
WirePad
TP_+5V, TP_EVA1, TP_EVA2, TP_EVA3, TP_EVA4, TP_EVA5, TP_LIGHT0, TP_N1 +2
16
WPAD-1-30AWG
WP1, WP2, WP3, WP4, WP5, WP6, WP7, WP8 +8
5
C104
C1, C2, C3, C5, C6
8
- 10K
R1, R2, R3, R4, R5, R6, R7, R8
1
- 1.5K
R9
10
- 1.2K
R12, R13, R14, R15, R16, R17, R18, R19 +2

UTILITY (NAVIGATION) MODULE design files

The KiCad project lives in the CodapopKSP/UntitledSpaceCraft repository on GitHub; these links point at the commit this page was built from.

UTILITY (NAVIGATION) MODULE: common questions

What microcontroller does the UTILITY (NAVIGATION) MODULE use?

The UTILITY (NAVIGATION) MODULE is built around the ATtiny45, from the AVR/Arduino family.

How big is the UTILITY (NAVIGATION) MODULE?

The UTILITY (NAVIGATION) MODULE measures 28 × 28 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the UTILITY (NAVIGATION) MODULE?

55 components, from 9 distinct parts. The full bill of materials is listed on this page.

Where can I download the UTILITY (NAVIGATION) MODULE design files?

From the CodapopKSP/UntitledSpaceCraft repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the UTILITY (NAVIGATION) MODULE design in my own project?

Yes, under the terms of its GPL-3.0 license, which CodapopKSP chose for the repository.

Can I test firmware for the UTILITY (NAVIGATION) MODULE without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.

More boards in UntitledSpaceCraft

Similar boards