HardLabs

CONTROL SYSTEMS MODULE

CodapopKSP·UntitledSpaceCraft·PCBs/Source/Control_Systems_Module/Control_Systems_Module.kicad_pcb

CONTROL SYSTEMS MODULE layout, top view — open source AVR/Arduino board by CodapopKSP
Simulate this board

About the CONTROL SYSTEMS MODULE

CONTROL SYSTEMS MODULE is an open source AVR/Arduino PCB design by CodapopKSP, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 13 × 14 mm, with 94 components from 6 distinct parts.

Its main chip is the ATtiny45, from the AVR/Arduino family. Other key parts include the 74HC595 and 74HC165. By type, the board carries 22 resistors, 6 ICs and 6 capacitors.

From the project

The entire project files from the Untitled Space Craft brand of Kerbal controllers.

Untitled Space Craft is a modular controller system originally developed by Codapop. For build instructions and information, check the releases for updated documentation.

This project is licensed under the GNU General Public License v3.0 (GPL-3.0).

While you are free to use, modify, and redistribute the files in this project under the terms of the GPL-3.0, please note the following restrictions regarding commercial use:

Main components on the CONTROL SYSTEMS MODULE

ATtiny4574HC59574HC165

CONTROL SYSTEMS MODULE bill of materials (BOM)

94 components, 6 distinct parts.

QtyPartRefs
2
ATtiny45
U1, U2
2
74HC595
U3, U4
2
74HC165
U5, U6
60
WPAD-1-30AWG
WP1, WP2, WP3, WP4, WP5, WP6, WP7, WP8 +52
6
C104
C1, C2, C3, C4, C5, C6
22
- 10K
R1, R2, R3, R4, R5, R6, R7, R8 +14

CONTROL SYSTEMS MODULE design files

The KiCad project lives in the CodapopKSP/UntitledSpaceCraft repository on GitHub; these links point at the commit this page was built from.

CONTROL SYSTEMS MODULE: common questions

What microcontroller does the CONTROL SYSTEMS MODULE use?

The CONTROL SYSTEMS MODULE is built around the ATtiny45, from the AVR/Arduino family.

How big is the CONTROL SYSTEMS MODULE?

The CONTROL SYSTEMS MODULE measures 13 × 14 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the CONTROL SYSTEMS MODULE?

94 components, from 6 distinct parts. The full bill of materials is listed on this page.

Where can I download the CONTROL SYSTEMS MODULE design files?

From the CodapopKSP/UntitledSpaceCraft repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the CONTROL SYSTEMS MODULE design in my own project?

Yes, under the terms of its GPL-3.0 license, which CodapopKSP chose for the repository.

Can I test firmware for the CONTROL SYSTEMS MODULE without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.

More boards in UntitledSpaceCraft

Similar boards