Instruction register
codemonkey76·DIY-8-Bit-Computer·Instruction Register/instruction-register.kicad_pcb
About the Instruction register PCB
Instruction register is an open source PCB design by codemonkey76, published on GitHub. It is a 2-layer board measuring 78.7 × 58.4 mm, with 24 components from 9 distinct parts.
Other key parts include the 74LS245 and 74LS173. By type, the board carries 8 diodes, 8 resistors, 4 connectors, 3 ICs and 1 capacitor.
From the project
DIY 8-Bit Computer, based on the design by Ben Eater
Based off schematics and design of breadboard computer by Ben Eater, available in kit form at: https://eater.net/8bit/kits
Main components on the Instruction register
Instruction register bill of materials (BOM)
24 components, 9 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 74LS245 | DIP-20_W7.62mm_Socket | U1 |
| 2 | 74LS173 | DIP-16_W7.62mm_Socket | U2, U3 |
| 1 | Bus | JST_PH_S8B-PH-K_1x08_P2.00mm_Horizontal | J1 |
| 1 | Instruction | JST_PH_S4B-PH-K_1x04_P2.00mm_Horizontal | J2 |
| 1 | Misc | JST_PH_S4B-PH-K_1x04_P2.00mm_Horizontal | J3 |
| 1 | Power | JST_PH_S2B-PH-K_1x02_P2.00mm_Horizontal | J4 |
| 8 | LED | LED_D5.0mm | D1, D2, D3, D4, D5, D6, D7, D8 |
| 1 | 100nF | C_Disc_D3.0mm_W1.6mm_P2.50mm | C1 |
| 8 | 220R | R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R1, R2, R3, R4, R5, R6, R7, R8 |
Instruction register design files
The KiCad project lives in the codemonkey76/DIY-8-Bit-Computer repository on GitHub; these links point at the commit this page was built from.
Instruction register: common questions
How big is the Instruction register PCB?
The Instruction register measures 78.7 × 58.4 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Instruction register?
24 components, from 9 distinct parts. The full bill of materials is listed on this page.
Where can I download the Instruction register design files?
From the codemonkey76/DIY-8-Bit-Computer repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Instruction register design in my own project?
The repository has no license, so all rights stay with codemonkey76. Use it as a reference, and ask the author before reusing the design.
More boards in DIY-8-Bit-Computer
Control logic
codemonkey76
90.2 × 99.1 mm63 parts2LNo license0Alu
codemonkey76
90.2 × 88.9 mm33 parts2LNo license0Memory
codemonkey76
95.3 × 81.3 mm33 parts2LNo license0DIY 8-Bit Computer - Clock
codemonkey76
72.4 × 63.5 mm30 parts2LNo license0Register a
codemonkey76
78.7 × 58.4 mm24 parts2LNo license0Register b
codemonkey76
78.7 × 58.4 mm24 parts2LNo license0Output register
codemonkey76
72.4 × 74.9 mm21 parts2LNo license0Address register
codemonkey76
72.4 × 50.8 mm21 parts2LNo license0Bus
codemonkey76
80 × 93.2 mm19 parts2LNo license0Program counter
codemonkey76
63.5 × 45.7 mm14 parts2LNo license0