Memory
codemonkey76·DIY-8-Bit-Computer·Memory/memory.kicad_pcb
About the Memory PCB
Memory is an open source PCB design by codemonkey76, published on GitHub. It is a 2-layer board measuring 95.3 × 81.3 mm, with 33 components from 15 distinct parts.
Other key parts include the 74LS157, 74LS189, 74LS04, 74LS00 and 74LS245. By type, the board carries 9 ICs, 9 resistors, 8 diodes, 4 connectors, 2 switches and 1 capacitor.
From the project
DIY 8-Bit Computer, based on the design by Ben Eater
Based off schematics and design of breadboard computer by Ben Eater, available in kit form at: https://eater.net/8bit/kits
Main components on the Memory
Memory bill of materials (BOM)
33 components, 15 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 3 | 74LS157 | DIP-16_W7.62mm_Socket | U1, U8, U9 |
| 2 | 74LS189 | DIP-16_W7.62mm_Socket | U2, U6 |
| 2 | 74LS04 | DIP-14_W7.62mm_Socket | U3, U5 |
| 1 | 74LS00 | DIP-14_W7.62mm_Socket | U4 |
| 1 | 74LS245 | DIP-20_W7.62mm_Socket | U7 |
| 1 | Power | JST_PH_S2B-PH-K_1x02_P2.00mm_Horizontal | J1 |
| 1 | Misc | JST_PH_S4B-PH-K_1x04_P2.00mm_Horizontal | J2 |
| 1 | Address | JST_PH_S4B-PH-K_1x04_P2.00mm_Horizontal | J3 |
| 1 | Bus | JST_PH_S8B-PH-K_1x08_P2.00mm_Horizontal | J4 |
| 1 | SW_Push | SW_PUSH_6mm_H5mm | SW1 |
| 1 | SW_DIP_x08 | SW_DIP_SPSTx08_Slide_9.78x22.5mm_W7.62mm_P2.54mm | SW2 |
| 8 | LED | LED_D5.0mm | D1, D2, D3, D4, D5, D6, D7, D8 |
| 1 | 10nF | C_Disc_D3.0mm_W1.6mm_P2.50mm | C1 |
| 8 | 220R | R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R1, R2, R3, R4, R5, R6, R7, R8 |
| 1 | 1K | R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R9 |
Memory design files
The KiCad project lives in the codemonkey76/DIY-8-Bit-Computer repository on GitHub; these links point at the commit this page was built from.
- LayoutMemory/memory.kicad_pcb
Memory: common questions
How big is the Memory PCB?
The Memory measures 95.3 × 81.3 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Memory?
33 components, from 15 distinct parts. The full bill of materials is listed on this page.
Where can I download the Memory design files?
From the codemonkey76/DIY-8-Bit-Computer repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Memory design in my own project?
The repository has no license, so all rights stay with codemonkey76. Use it as a reference, and ask the author before reusing the design.
More boards in DIY-8-Bit-Computer
Control logic
codemonkey76
90.2 × 99.1 mm63 parts2LNo license0Alu
codemonkey76
90.2 × 88.9 mm33 parts2LNo license0DIY 8-Bit Computer - Clock
codemonkey76
72.4 × 63.5 mm30 parts2LNo license0Instruction register
codemonkey76
78.7 × 58.4 mm24 parts2LNo license0Register a
codemonkey76
78.7 × 58.4 mm24 parts2LNo license0Register b
codemonkey76
78.7 × 58.4 mm24 parts2LNo license0Output register
codemonkey76
72.4 × 74.9 mm21 parts2LNo license0Address register
codemonkey76
72.4 × 50.8 mm21 parts2LNo license0Bus
codemonkey76
80 × 93.2 mm19 parts2LNo license0Program counter
codemonkey76
63.5 × 45.7 mm14 parts2LNo license0