Output register
codemonkey76·DIY-8-Bit-Computer·Output Register/output-register.kicad_pcb
About the Output register PCB
Output register is an open source PCB design by codemonkey76, published on GitHub. It is a 2-layer board measuring 72.4 × 74.9 mm, with 21 components from 16 distinct parts.
Other key parts include the 74LS08, LM555, 74LS273, 74LS76 and 24C16. By type, the board carries 10 ICs, 4 capacitors, 3 connectors, 3 resistors and 1 switch.
From the project
DIY 8-Bit Computer, based on the design by Ben Eater
Based off schematics and design of breadboard computer by Ben Eater, available in kit form at: https://eater.net/8bit/kits
Main components on the Output register
Output register bill of materials (BOM)
21 components, 16 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 74LS08 | DIP-14_W7.62mm_Socket | U1 |
| 1 | LM555 | DIP-8_W7.62mm_Socket | U2 |
| 1 | 74LS273 | DIP-20_W7.62mm_Socket | U3 |
| 1 | 74LS76 | DIP-16_W7.62mm_Socket | U4 |
| 1 | 24C16 | DIP-24_W7.62mm_Socket | U5 |
| 1 | 74LS139 | DIP-16_W7.62mm_Socket | U6 |
| 4 | HDSP-7403 | HDSP-7401 | U7, U8, U9, U10 |
| 1 | Bus | JST_PH_S8B-PH-K_1x08_P2.00mm_Horizontal | J1 |
| 1 | Power | JST_PH_S2B-PH-K_1x02_P2.00mm_Horizontal | J2 |
| 1 | Misc | JST_PH_S3B-PH-K_1x03_P2.00mm_Horizontal | J3 |
| 1 | Negative | SW_PUSH_E-Switch_FS5700DP_DPDT | SW1 |
| 2 | 10nF | C_Disc_D3.0mm_W1.6mm_P2.50mm | C1, C2 |
| 2 | 100nF | C_Disc_D3.0mm_W1.6mm_P2.50mm | C3, C4 |
| 1 | 10K | R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R1 |
| 1 | 100K | R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R2 |
| 1 | 1K | R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R3 |
Output register design files
The KiCad project lives in the codemonkey76/DIY-8-Bit-Computer repository on GitHub; these links point at the commit this page was built from.
Output register: common questions
How big is the Output register PCB?
The Output register measures 72.4 × 74.9 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Output register?
21 components, from 16 distinct parts. The full bill of materials is listed on this page.
Where can I download the Output register design files?
From the codemonkey76/DIY-8-Bit-Computer repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Output register design in my own project?
The repository has no license, so all rights stay with codemonkey76. Use it as a reference, and ask the author before reusing the design.
More boards in DIY-8-Bit-Computer
Control logic
codemonkey76
90.2 × 99.1 mm63 parts2LNo license0Alu
codemonkey76
90.2 × 88.9 mm33 parts2LNo license0Memory
codemonkey76
95.3 × 81.3 mm33 parts2LNo license0DIY 8-Bit Computer - Clock
codemonkey76
72.4 × 63.5 mm30 parts2LNo license0Register b
codemonkey76
78.7 × 58.4 mm24 parts2LNo license0Instruction register
codemonkey76
78.7 × 58.4 mm24 parts2LNo license0Register a
codemonkey76
78.7 × 58.4 mm24 parts2LNo license0Address register
codemonkey76
72.4 × 50.8 mm21 parts2LNo license0Bus
codemonkey76
80 × 93.2 mm19 parts2LNo license0Program counter
codemonkey76
63.5 × 45.7 mm14 parts2LNo license0