DIY 8-Bit Computer - Clock
codemonkey76·DIY-8-Bit-Computer·Clock/Clock.kicad_pcb
About the DIY 8-Bit Computer - Clock PCB
DIY 8-Bit Computer - Clock is an open source PCB design by codemonkey76, published on GitHub. It is a 2-layer board measuring 72.4 × 63.5 mm, with 30 components from 15 distinct parts.
Other key parts include the 74LS04, LM555, 74LS08 and 74LS32. By type, the board carries 9 resistors, 7 capacitors, 6 ICs, 3 diodes, 2 connectors and 2 switches.
From the project
DIY 8-Bit Computer, based on the design by Ben Eater
Based off schematics and design of breadboard computer by Ben Eater, available in kit form at: https://eater.net/8bit/kits
Main components on the DIY 8-Bit Computer - Clock
DIY 8-Bit Computer - Clock bill of materials (BOM)
30 components, 15 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 74LS04 | DIP-14_W7.62mm_Socket | U1 |
| 3 | LM555 | DIP-8_W7.62mm_Socket | U2, U5, U6 |
| 1 | 74LS08 | DIP-14_W7.62mm_Socket | U3 |
| 1 | 74LS32 | DIP-14_W7.62mm_Socket | U4 |
| 1 | Power | JST_PH_S2B-PH-K_1x02_P2.00mm_Horizontal | J1 |
| 1 | Signal | JST_PH_S3B-PH-K_1x03_P2.00mm_Horizontal | J2 |
| 1 | 1M | Potentiometer_Bourns_3266Y_Vertical | RV1 |
| 1 | SW_Push | SW_PUSH_6mm_H5mm | SW1 |
| 1 | SW_DPDT_x2 | SW_PUSH_E-Switch_FS5700DP_DPDT | SW2 |
| 3 | YELLOW | LED_D5.0mm | D1, D2, D3 |
| 4 | 10nF | C_Disc_D3.0mm_W1.6mm_P2.50mm | C1, C3, C4, C7 |
| 3 | 100nF | C_Disc_D3.0mm_W1.6mm_P2.50mm | C2, C5, C6 |
| 3 | 220R | R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R1, R4, R7 |
| 5 | 1K | R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R2, R3, R5, R8, R9 |
| 1 | 1M | R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R6 |
DIY 8-Bit Computer - Clock design files
The KiCad project lives in the codemonkey76/DIY-8-Bit-Computer repository on GitHub; these links point at the commit this page was built from.
- LayoutClock/Clock.kicad_pcb
DIY 8-Bit Computer - Clock: common questions
How big is the DIY 8-Bit Computer - Clock PCB?
The DIY 8-Bit Computer - Clock measures 72.4 × 63.5 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the DIY 8-Bit Computer - Clock?
30 components, from 15 distinct parts. The full bill of materials is listed on this page.
Where can I download the DIY 8-Bit Computer - Clock design files?
From the codemonkey76/DIY-8-Bit-Computer repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the DIY 8-Bit Computer - Clock design in my own project?
The repository has no license, so all rights stay with codemonkey76. Use it as a reference, and ask the author before reusing the design.
More boards in DIY-8-Bit-Computer
Control logic
codemonkey76
90.2 × 99.1 mm63 parts2LNo license0Memory
codemonkey76
95.3 × 81.3 mm33 parts2LNo license0Alu
codemonkey76
90.2 × 88.9 mm33 parts2LNo license0Instruction register
codemonkey76
78.7 × 58.4 mm24 parts2LNo license0Register a
codemonkey76
78.7 × 58.4 mm24 parts2LNo license0Register b
codemonkey76
78.7 × 58.4 mm24 parts2LNo license0Output register
codemonkey76
72.4 × 74.9 mm21 parts2LNo license0Address register
codemonkey76
72.4 × 50.8 mm21 parts2LNo license0Bus
codemonkey76
80 × 93.2 mm19 parts2LNo license0Program counter
codemonkey76
63.5 × 45.7 mm14 parts2LNo license0