Mini doom player
CODER-MAN12·Mini-doom-player·Pdb design/game boy fake/game boy fake.kicad_pcb
About the Mini doom player PCB
Mini doom player is an open source ESP32 PCB design by CODER-MAN12, published on GitHub. It is a 2-layer board measuring 209 × 166.5 mm, with 14 components from 6 distinct parts.
Its main chip is the ESP32-S3-WROOM-2, from the ESP32 family. Other key parts include the EA_eDIPTFT70-A and LD1117S33TR_SOT223. By type, the board carries 8 switches, 3 ICs, 2 resistors and 1 connector.
It belongs with the retro computing and iot & wireless designs in this gallery.
From the project
It is a mini doom game player
A portable, custom-designed handheld gaming console built to run a port of DOOM, powered by an ESP32-S3 microcontroller and an 8-button custom mechanical keypad.
This repository contains the hardware design files, schematics, and Bill of Materials (BOM) for a custom-fabricated circuit board designed for a mini retro gaming console.
Microcontroller: ESP32-S3-WROOM-2 (Dual-core Xtensa 32-bit LX7, Wi-Fi & BLE) Input Array: 8× Mechanical Push Switches / Tactile Buttons Power Management: USB-C powered via a 16-pin receptacle, stepped down via an LD1117S33TR 3.3V LDO regulator with proper 5.1kΩ…
Main components on the Mini doom player
Mini doom player bill of materials (BOM)
14 components, 6 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | EA_eDIPTFT70-A | EA_eDIPTFT70-XXX | U1 |
| 1 | ESP32-S3-WROOM-2 | ESP32-S3-WROOM-2 | U2 |
| 1 | LD1117S33TR_SOT223 | SOT-223-3_TabPin2 | U3 |
| 1 | USB_C_RECEPTACLE_USB2.0_16P USB_C_Receptacle_USB2.0_16P | USB_C_Receptacle_HCTL_HC-TYPE-C-16P-01A | J1 |
| 8 | SW_Push | SW_Push_1P1T_NO_CK_PTS125Sx43PSMTR | SW1, SW2, SW3, SW4, SW5, SW6, SW7, SW8 |
| 2 | 5.1k | R_0402_1005Metric | R1, R2 |
Mini doom player design files
The KiCad project lives in the CODER-MAN12/Mini-doom-player repository on GitHub; these links point at the commit this page was built from.
Mini doom player: common questions
What microcontroller does the Mini doom player use?
The Mini doom player is built around the ESP32-S3-WROOM-2, from the ESP32 family.
How big is the Mini doom player PCB?
The Mini doom player measures 209 × 166.5 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Mini doom player?
14 components, from 6 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Mini doom player design files?
From the CODER-MAN12/Mini-doom-player repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Mini doom player design in my own project?
The repository has no license, so all rights stay with CODER-MAN12. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Mini doom player without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k