HardLabs

BurgerDisk-THT-SolderTypeDB19

colinleroy·BurgerDisk·PCB/BurgerDisk-THT/BurgerDisk-THT-SolderTypeDB19.kicad_pcb

BurgerDisk-THT-SolderTypeDB19 PCB layout, top view — open source AVR/Arduino board by colinleroy

About the BurgerDisk-THT-SolderTypeDB19 PCB

BurgerDisk-THT-SolderTypeDB19 is an open source AVR/Arduino PCB design by colinleroy, published on GitHub under the MIT license. It is a 2-layer board measuring 93.7 × 81.5 mm, with 14 components from 14 distinct parts.

Its main chip is the Arduino_Nano_v3.x, from the AVR/Arduino family. Other key parts include the PC817. By type, the board carries 5 resistors, 4 connectors, 3 diodes, 1 IC and 1 module.

From the project

A daisy-chainable Smartport hard drive for the Apple II

In this directory are the Kicad sources for the different PCBs. Variations exist: - -Angled: For a right-angle, PCB-type DB19F connector (otherwise, panel-mount (solder cups) connector required) - -THT: Through-hold PCB. Will require an Arduino and SD module - *-SMD: SMD PCB with the Atmega328p integrated, and the microSD where applicable

PCBs families: - BurgerDisk: The simpler PCB, with more enclosures options (Full or micro SD) - Mini: Everything integrated, for the Mini enclosure - Domino: Everything integrated, as small as possible. - (micro)SD-module: the card readers for the BurgerDisk

Main components on the BurgerDisk-THT-SolderTypeDB19

PC817Arduino_Nano_v3.x

BurgerDisk-THT-SolderTypeDB19 bill of materials (BOM)

14 components, 14 distinct parts.

QtyPartRefs
1
PC817
U1
1
Arduino_Nano_v3.x
A1
1
Daisy port in
J1
1
MicroSD module
J2
1
UART
J3
1
Daisy port out
J4
1
1N4448
D2
1
1N5818
D3
1
LED
D4
1
330
R1
1
150
R2
1
470
R3
1
10000
R4
1
1000
R5

BurgerDisk-THT-SolderTypeDB19 design files

The KiCad project lives in the colinleroy/BurgerDisk repository on GitHub; these links point at the commit this page was built from.

BurgerDisk-THT-SolderTypeDB19: common questions

What microcontroller does the BurgerDisk-THT-SolderTypeDB19 use?

The BurgerDisk-THT-SolderTypeDB19 is built around the Arduino_Nano_v3.x, from the AVR/Arduino family.

How big is the BurgerDisk-THT-SolderTypeDB19 PCB?

The BurgerDisk-THT-SolderTypeDB19 measures 93.7 × 81.5 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the BurgerDisk-THT-SolderTypeDB19?

14 components, from 14 distinct parts. The full bill of materials is listed on this page.

Where can I download the BurgerDisk-THT-SolderTypeDB19 design files?

From the colinleroy/BurgerDisk repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the BurgerDisk-THT-SolderTypeDB19 design in my own project?

Yes, under the terms of its MIT license, which colinleroy chose for the repository.

Can I test firmware for the BurgerDisk-THT-SolderTypeDB19 without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.

More boards in BurgerDisk

Similar boards