HardLabs

MicroSD-module

colinleroy·BurgerDisk·PCB/MicroSD-module/MicroSD-module.kicad_pcb

MicroSD-module layout, top view — open source board by colinleroy

About the MicroSD-module

MicroSD-module is an open source PCB design by colinleroy, published on GitHub under the MIT license. It is a 2-layer board measuring 24.4 × 41.9 mm, with 10 components from 8 distinct parts.

Other key parts include the SE5218 and TXB0104PWR. By type, the board carries 5 capacitors, 2 ICs, 1 connector, 1 relay and 1 resistor.

From the project

A daisy-chainable Smartport hard drive for the Apple II

In this directory are the Kicad sources for the different PCBs. Variations exist: - -Angled: For a right-angle, PCB-type DB19F connector (otherwise, panel-mount (solder cups) connector required) - -THT: Through-hold PCB. Will require an Arduino and SD module - *-SMD: SMD PCB with the Atmega328p integrated, and the microSD where applicable

PCBs families: - BurgerDisk: The simpler PCB, with more enclosures options (Full or micro SD) - Mini: Everything integrated, for the Mini enclosure - Domino: Everything integrated, as small as possible. - (micro)SD-module: the card readers for the BurgerDisk

Main components on the MicroSD-module

SE5218TXB0104PWR

MicroSD-module bill of materials (BOM)

10 components, 8 distinct parts.

QtyPartRefs
1
SE5218
U1
1
TXB0104PWR
U2
1
Connector
J1
1
HYC77-TF09-200
K1
2
2u2
C1, C2
2
100n
C3, C4
1
22uf
C5
1
10k
R1

MicroSD-module design files

The KiCad project lives in the colinleroy/BurgerDisk repository on GitHub; these links point at the commit this page was built from.

MicroSD-module: common questions

How big is the MicroSD-module?

The MicroSD-module measures 24.4 × 41.9 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the MicroSD-module?

10 components, from 8 distinct parts. The full bill of materials is listed on this page.

Where can I download the MicroSD-module design files?

From the colinleroy/BurgerDisk repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the MicroSD-module design in my own project?

Yes, under the terms of its MIT license, which colinleroy chose for the repository.

More boards in BurgerDisk