HardLabs

DominoDisk-SMD-Angled

colinleroy·BurgerDisk·PCB/DominoDisk-SMD-Angled/DominoDisk-SMD-Angled.kicad_pcb

DominoDisk-SMD-Angled PCB layout, top view — open source AVR/Arduino board by colinleroy

About the DominoDisk-SMD-Angled PCB

DominoDisk-SMD-Angled is an open source AVR/Arduino PCB design by colinleroy, published on GitHub under the MIT license. It is a 4-layer board measuring 45 × 35.2 mm, with 26 components from 21 distinct parts.

Its main chip is the ATmega328P-AU, from the AVR/Arduino family. Other key parts include the PC817C-S, TXB0104PWR level shifter and SE5218ALG voltage regulator. By type, the board carries 7 resistors, 6 capacitors, 4 ICs, 4 connectors, 3 diodes and 1 crystal.

From the project

A daisy-chainable Smartport hard drive for the Apple II

In this directory are the Kicad sources for the different PCBs. Variations exist: - -Angled: For a right-angle, PCB-type DB19F connector (otherwise, panel-mount (solder cups) connector required) - -THT: Through-hold PCB. Will require an Arduino and SD module - *-SMD: SMD PCB with the Atmega328p integrated, and the microSD where applicable

PCBs families: - BurgerDisk: The simpler PCB, with more enclosures options (Full or micro SD) - Mini: Everything integrated, for the Mini enclosure - Domino: Everything integrated, as small as possible. - (micro)SD-module: the card readers for the BurgerDisk

Main components on the DominoDisk-SMD-Angled

PC817C-SATmega328P-AUTXB0104PWR level shifterSE5218ALG voltage regulator

DominoDisk-SMD-Angled bill of materials (BOM)

26 components, 21 distinct parts.

QtyPartRefs
1
PC817C-S
U1
1
ATmega328P-AU
U2
1
TXB0104PWR level shifter
U3
1
SE5218ALG voltage regulator
U4
1
CSTNE16M0V530000R0 Resonator
Y1
1
Daisy port out
J1
1
ICSP_ISP6
J2
1
Daisy port in
J3
1
UART
J4
1
TF-104 MicroSD card holder
K1
1
LED
D1
1
1N5818WS
D2
1
1N4448WS
D3
1
22uF
C1
3
100n
C2, C3, C4
2
2u2
C5, C6
1
100
R1
1
470
R2
3
10k
R3, R4, R6
1
1k
R5
Show 1 more
QtyPartRefs
1
330
R7

DominoDisk-SMD-Angled design files

The KiCad project lives in the colinleroy/BurgerDisk repository on GitHub; these links point at the commit this page was built from.

DominoDisk-SMD-Angled: common questions

What microcontroller does the DominoDisk-SMD-Angled use?

The DominoDisk-SMD-Angled is built around the ATmega328P-AU, from the AVR/Arduino family.

How big is the DominoDisk-SMD-Angled PCB?

The DominoDisk-SMD-Angled measures 45 × 35.2 mm, has 4 copper layers and is 1.6 mm thick.

How many components are on the DominoDisk-SMD-Angled?

26 components, from 21 distinct parts. The full bill of materials is listed on this page.

Where can I download the DominoDisk-SMD-Angled design files?

From the colinleroy/BurgerDisk repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the DominoDisk-SMD-Angled design in my own project?

Yes, under the terms of its MIT license, which colinleroy chose for the repository.

Can I test firmware for the DominoDisk-SMD-Angled without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.

More boards in BurgerDisk

Similar boards