HAT ver 5.1
About the HAT ver 5.1
HAT ver 5.1 is an open source PCB design by ConnectBox, published on GitHub. It is a 2-layer board measuring 56.6 × 71.6 mm, with 68 components from 38 distinct parts.
Other key parts include the AXP209, MT3608, MIC2019YM6, HC-R8812AF1 and F12ASUM13-W2. By type, the board carries 28 resistors, 17 capacitors, 6 connectors, 5 ICs, 3 LEDs and 2 diodes.
It belongs with the dev boards & breakouts designs in this gallery.
From the project
Connectbox Circuit Design
This repo contains the schematic and KiCAD design files for the NEO-USB-HAT. This is a daugherboard to add an extra USB port and power input to a NanoPi NEO.
Main components on the HAT ver 5.1
HAT ver 5.1 bill of materials (BOM)
68 components, 38 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | AXP209 X-Powers | UQFN-48-1EP_6x6mm_Pitch0.4mm_75 | U1 |
| 1 | MT3608 AEROSEMI | SOT-23-6a | U2 |
| 1 | MIC2019YM6 MIC2019 Microchip Technology | SOT-23-6a | U3 |
| 1 | HC-R8812AF1 | HC-R8812AU2 | U4 |
| 1 | F12ASUM13-W2 | F12ASUM13-W2 | U5 |
| 1 | PPPC081LFBN-RC Conn_01x08 Sullins Connector Solutions | PinHeader_1x08_P2.54mm_Vertical | P1 |
| 2 | PPPC051LFBN-RC Conn_01x05 Sullins Connector Solutions | PinHeader_1x05_P2.54mm_Vertical | P2, P6 |
| 1 | USB-A1HSW6 USB_A_1 On Shore Technology Inc. | USB_A | P3 |
| 1 | 10118194-0001LF USB_OTG-1 Amphenol ICC (FCI) | USB_Micro-B-TH-mount | P4 |
| 1 | PPPC041LFBN-RC Conn_01x04 Sullins Connector Solutions | PinHeader_1x04_P2.54mm_Vertical | P7 |
| 1 | 530470210 Molex PicoBlade 53047-0210 Molex | Molex PicoBlade 53047-0210 - (swapped pins) | BAT1 |
| 1 | Jumper_NC_Small | NetConnect | JP1 |
| 2 | TL3305AF260QG SPST-PUSH E-Switch | SW-TL3305 | PB1, PB2 |
| 1 | OS102011MA1QN1 SPDT-2C C&K | SPDT-OS10211 | SW1 |
| 1 | LTST-C191KRKT Red Lite-On Inc. | LED_0603_1608Metric | LED1 |
| 1 | LTST-C191KFKT Amber Lite-On Inc. | LED_0603_1608Metric | LED2 |
| 1 | LTST-C191KFKT Green Lite-On Inc. | LED_0603_1608Metric | LED3 |
| 1 | NRVTS260ESFT1G ON Semiconductor | SOD-123FL | D1 |
| 1 | MMBD914LT1G MMBD914 ON Semiconductor | D_SOT-23_ANK | D2 |
| 2 | NR6028T4R7M 4.7 uH Taiyo Yuden | INDUCTOR_SMD_6x6-1 | L1, L2 |
Show 18 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 6 | CL21A106MPFNNNE 10uF Samsung Electro-Mechanics | C_0805_2012Metric | C1, C2, C3, C4, C5, C16 |
| 3 | C0805C105K8PACTU 1uF KEMET | C_0805_2012Metric | C6, C9, C10 |
| 5 | C0805C226M8PAC7800 22uF KEMET | C_0805_2012Metric | C7, C8, C14, C15, C17 |
| 3 | CL21B475KPFNNNE 4.7uF Samsung Electro-Mechanics | C_0805_2012Metric | C11, C12, C13 |
| 1 | RC0805FR-07162R 162 Yageo | R_0805_2012Metric | R1 |
| 1 | ERJ-6CWFR030V 0.03 ohm Panasonic Electronic Components | R_0805_2012Metric | R2 |
| 6 | RC0805FR-071KL 1K Yageo | R_0805_2012Metric | R3, R9, R10, R11, R13, R22 |
| 1 | RC0805FR-071K8L 1.8K Yageo | R_0805_2012Metric | R4 |
| 1 | RC0805FR-071KL 51K Yageo | R_0805_2012Metric | R5 |
| 1 | RC0805FR-07220KL 220K Yageo | R_0805_2012Metric | R6 |
| 1 | RC0805FR-07100RL 100 Yageo | R_0805_2012Metric | R7 |
| 3 | RC0805FR-0710KL 10K Yageo | R_0805_2012Metric | R8, R16, R17 |
| 3 | RC0805FR-072K2L 2.2K Yageo | R_0805_2012Metric | R12, R18, R19 |
| 2 | RC0805FR-07200KL 200K Yageo | R_0805_2012Metric | R20, R26 |
| 1 | RC0805FR-0727KL 27.0K Yageo | R_0805_2012Metric | R27 |
| 1 | 1K | R_0805_2012Metric | R30 |
| 3 | 100 | R_0805_2012Metric | R31, R33, R34 |
| 3 | 0 | R_0805_2012Metric | R32, R35, R36 |
HAT ver 5.1 design files
The KiCad project lives in the ConnectBox/Circuit-Design repository on GitHub; these links point at the commit this page was built from.
HAT ver 5.1: common questions
How big is the HAT ver 5.1?
The HAT ver 5.1 measures 56.6 × 71.6 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the HAT ver 5.1?
68 components, from 38 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the HAT ver 5.1 design files?
From the ConnectBox/Circuit-Design repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the HAT ver 5.1 design in my own project?
The repository has no license, so all rights stay with ConnectBox. Use it as a reference, and ask the author before reusing the design.
More boards in Circuit-Design
AVR/ArduinoHAT CM4 183
105.6 × 86.1 mm161 parts6LNo license0
AVR/ArduinoHAT CM4 DRC 1
105.6 × 86.1 mm147 parts6LNo license0
AVR/ArduinoConnectBox HAT using RPi CM4
105 × 78 mm130 parts4LNo license0
HAT ver 7
57.4 × 71.6 mm72 parts2LNo license0
HAT ver 8
57.4 × 71.6 mm72 parts2LNo license0
HAT ver 6.0
56.6 × 71.6 mm68 parts2LNo license0
NanoPi NEO USB HAT - Version 4.7
66 × 81.6 mm63 parts2LNo license0
ConnectBox HAT 8
53.7 × 87 mm60 parts4LNo license0
ConnectBox HAT-A
41.6 × 79.2 mm54 parts4LNo license0
ConnectBox - Battery Board
52.3 × 80.4 mm31 parts2LNo license0
HATB ver 8
57.6 × 88.2 mm21 parts2LNo license0
Similar boards
88 Pin Vag Breakout
rusefi
142 × 58 mm91 parts2LGPL-3.01.2k
134pin 7-967288-1
139.7 × 73.7 mm38 parts2LGPL-3.01.2k
Breakout 60pin EEC-IV
139.7 × 62.2 mm15 parts2LGPL-3.01.2k
Breakout 112pin Connector
174 × 58 mm39 parts2LGPL-3.01.2k
Eecv breakout
140.8 × 53.7 mm9 parts4LGPL-3.01.2k
Rj45 breakout
rene-dev
15.2 × 53.8 mm3 parts2LGPL-3.0979