NanoPi NEO USB HAT - Version 4.7
About the NanoPi NEO USB HAT - Version 4.7
NanoPi NEO USB HAT - Version 4.7 is an open source PCB design by ConnectBox, published on GitHub. It is a 2-layer board measuring 66 × 81.6 mm, with 63 components from 40 distinct parts.
Other key parts include the AXP209, MT3608 and MIC2019YM6. By type, the board carries 22 resistors, 13 capacitors, 6 connectors, 3 ICs, 3 LEDs and 2 transistors.
It belongs with the dev boards & breakouts designs in this gallery, and the repository also holds 2 earlier revisions of it.
From the project
Connectbox Circuit Design
This repo contains the schematic and KiCAD design files for the NEO-USB-HAT. This is a daugherboard to add an extra USB port and power input to a NanoPi NEO.
Main components on the NanoPi NEO USB HAT - Version 4.7
NanoPi NEO USB HAT - Version 4.7 bill of materials (BOM)
63 components, 40 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | AXP209 X-Powers | UQFN-48-1EP_6x6mm_Pitch0.4mm | U1 |
| 1 | MT3608 AEROSEMI | SOT-23-6a | U2 |
| 1 | MIC2019YM6 MIC2019 Microchip Technology | SOT-23-6a | U3 |
| 1 | IRLML2502 | SOT-23 | Q1 |
| 1 | IRLML6402 | SOT-23 | Q2 |
| 1 | PPPC081LFBN-RC NEO_GPIO_PINS1 Sullins Connector Solutions | PinStrip_12-N | P1 |
| 1 | PPPC051LFBN-RC NEO_GPIO_PINS2 Sullins Connector Solutions | PinStrip_12 | P2 |
| 1 | 10118194-0001LF MICROUSB - Power Amphenol ICC (FCI) | USB_Micro-B_Molex_47346-0001 | P4 |
| 1 | USB_A | USB_A | P5 |
| 1 | PPPC051LFBN-RC NEO_GPIO_PINS2 Sullins Connector Solutions | PinStrip_12-N | P6 |
| 1 | PPPC041LFBN-RC CONN_01X04 Sullins Connector Solutions | OLED | P7 |
| 1 | 530470210 Battery Molex | Molex_53261 | BAT1 |
| 2 | TL3305AF260QG SPST-PUSH E-Switch | SW-TL3305 | PB1, PB2 |
| 1 | SPST-PUSH | SW-TL3305 | PB3 |
| 1 | OS102011MA1QN1 SPDT-2C C&K | SPDT-OS10211 | SW1 |
| 5 | TestPoint | ProbePad | TP_+5, TP_AC_IN1, TP_BATT+1, TP_GND1, TP_IPS_OUT1 |
| 1 | VAL** | hole_3mm | hole_3mm |
| 1 | LTST-C191KRKT Red Lite-On Inc. | LED_0603 | LED1 |
| 1 | LTST-C191KFKT Amber Lite-On Inc. | LED_0603 | LED2 |
| 1 | LTST-C191KFKT Green Lite-On Inc. | LED_0603 | LED3 |
Show 20 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | NRVTS260ESFT1G ON Semiconductor | SMA_Standard | D1 |
| 2 | NR6028T4R7M 4.7 uH Taiyo Yuden | INDUCTOR_SMD_6x6-1 | L1, L2 |
| 5 | CL21A106MPFNNNE 10uF Samsung Electro-Mechanics | C_0805 | C1, C2, C3, C4, C5 |
| 3 | C0805C105K8PACTU 1uF KEMET | C_0805 | C6, C9, C10 |
| 2 | C0805C226M8PAC7800 10uF/25V KEMET | C_0805 | C7, C8 |
| 3 | CL21B475KPFNNNE 4.7uF Samsung Electro-Mechanics | C_0805 | C11, C12, C13 |
| 1 | RC0805FR-07162R 162 Yageo | R_0805 | R1 |
| 1 | ERJ-6CWFR030V 0.03 ohm Panasonic Electronic Components | R_0805 | R2 |
| 4 | RC0805FR-071KL 1K Yageo | R_0805 | R3, R10, R11, R22 |
| 1 | RC0805FR-071K8L 1K Yageo | R_0805 | R4 |
| 2 | RC0805FR-071KL 10K Yageo | R_0805 | R5, R9 |
| 1 | RC0805FR-07220KL 10K Yageo | R_0805 | R6 |
| 1 | RC0805FR-07100RL 100 Yageo | R_0805 | R7 |
| 3 | RC0805FR-0710KL 10K Yageo | R_0805 | R8, R16, R17 |
| 1 | RC0805FR-072K2L 10K Yageo | R_0805 | R12 |
| 2 | RC0805FR-072K2L 2.2K Yageo | R_0805 | R18, R19 |
| 2 | RC0805FR-07200KL 200K Yageo | R_0805 | R20, R26 |
| 1 | 10K | R_0805 | R21 |
| 1 | 0 | R_0805 | R23 |
| 1 | RC0805FR-0727KL 27.3K Yageo | R_0805 | R27 |
NanoPi NEO USB HAT - Version 4.7 design files
The KiCad project lives in the ConnectBox/Circuit-Design repository on GitHub; these links point at the commit this page was built from.
NanoPi NEO USB HAT - Version 4.7: common questions
How big is the NanoPi NEO USB HAT - Version 4.7?
The NanoPi NEO USB HAT - Version 4.7 measures 66 × 81.6 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the NanoPi NEO USB HAT - Version 4.7?
63 components, from 40 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the NanoPi NEO USB HAT - Version 4.7 design files?
From the ConnectBox/Circuit-Design repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the NanoPi NEO USB HAT - Version 4.7 design in my own project?
The repository has no license, so all rights stay with ConnectBox. Use it as a reference, and ask the author before reusing the design.
More boards in Circuit-Design
AVR/ArduinoHAT CM4 183
105.6 × 86.1 mm161 parts6LNo license0
AVR/ArduinoHAT CM4 DRC 1
105.6 × 86.1 mm147 parts6LNo license0
AVR/ArduinoConnectBox HAT using RPi CM4
105 × 78 mm130 parts4LNo license0
HAT ver 7
57.4 × 71.6 mm72 parts2LNo license0
HAT ver 8
57.4 × 71.6 mm72 parts2LNo license0
HAT ver 5.1
56.6 × 71.6 mm68 parts2LNo license0
HAT ver 6.0
56.6 × 71.6 mm68 parts2LNo license0
ConnectBox HAT 8
53.7 × 87 mm60 parts4LNo license0
ConnectBox HAT-A
41.6 × 79.2 mm54 parts4LNo license0
ConnectBox - Battery Board
52.3 × 80.4 mm31 parts2LNo license0
HATB ver 8
57.6 × 88.2 mm21 parts2LNo license0
Earlier revisions in the repo: NanoPi_Neo_Daughterboard-Ver4.7, NanoPi_Neo_Daughterboard-Ver4
Similar boards
88 Pin Vag Breakout
rusefi
142 × 58 mm91 parts2LGPL-3.01.2k
134pin 7-967288-1
139.7 × 73.7 mm38 parts2LGPL-3.01.2k
Breakout 60pin EEC-IV
139.7 × 62.2 mm15 parts2LGPL-3.01.2k
Breakout 112pin Connector
174 × 58 mm39 parts2LGPL-3.01.2k
Eecv breakout
140.8 × 53.7 mm9 parts4LGPL-3.01.2k
Rj45 breakout
rene-dev
15.2 × 53.8 mm3 parts2LGPL-3.0979