Hackbat

controlpaths·hackbat·kicad/hackbat/hackbat.kicad_pcb

About the Hackbat PCB

Hackbat is an open source RP2040/RP2350 PCB design by controlpaths, published on GitHub under the CC0-1.0 license. It is a 4-layer board measuring 100 × 42 mm, with 78 components from 35 distinct parts.

Its main chip is the C2040, from the RP2040/RP2350 family. Other key parts include the C2940197, AMS1117-3.3, C784365, DM-OLED096-636 and C29953. By type, the board carries 29 resistors, 21 capacitors, 7 switches, 6 ICs, 5 connectors and 4 inductors.

It belongs with the rf & radio, iot & wireless and displays & leds designs in this gallery.

From the project

Hackbat repository

HackBat is an open-source device designed for hackers and makers to experiment with different pen-testing techniques. The device is based on the Raspberry Pi RP2040 microcontroller and has an RF transceiver, NFC, WIFI, OLED display...

The Raspberry Pi RP2040 is the brain of the HackBat. The main features of this MCU are:

- Dual-core Arm Cortex-M0+ processor, flexible clock running up to 133 MHz 264kB on-chip SRAM - 2 × UART - 2 × SPI controllers - 2 × I2C controllers - 16 × PWM channels - 1 × USB 1.1 controller and PHY, with host and device support - 8 × Programmable I/O (PIO) state…

Hackbat, from the project README — From the project README

Main components on the Hackbat

C2940197 C2040 AMS1117-3.3 C784365 DM-OLED096-636 C29953

Hackbat bill of materials (BOM)

78 components, 35 distinct parts — part numbers from the project's BOM.

Qty	Part	Footprint	Refs
1	C2940197 W25Q32JVZP	WSON-8-1EP_6x5mm_P1.27mm_EP3.4x4.3mm	U1
1	C2040 RP2040	QFN-56-1EP_7x7mm_P0.4mm_EP3.2x3.2mm	U2
1	AMS1117-3.3	SOT-223-3_TabPin2	U3
1	C784365 ESP-12F	ESP-12E	U4
1	DM-OLED096-636	oled_1.3	U5
1	C29953 CC1101	QFN-20-1EP_4x4mm_P0.5mm_EP2.6x2.6mm_ThermalVias	U6
1	C524716 12MHz	Crystal_SMD_3225-4Pin_3.2x2.5mm	Y1
1	C254353 27MHz	Crystal_SMD_3225-4Pin_3.2x2.5mm	Y2
1	Conn_Coaxial	SMA_Amphenol_132289_EdgeMount	J1
1	C132562 USB_B_Micro	USB_Micro-B_Amphenol_10118193-0001LF_Horizontal	J2
1	Conn_01x04_Pin	PinHeader_1x04_P2.54mm_Vertical	J3
1	C114218 Micro_SD_Card_Det_Hirose_DM3AT	microSD_HC_Hirose_DM3AT-SF-PEJM5	J4
1	CONN_01X04_PIN Conn_01x04_Pin	PinHeader_1x04_P2.54mm_Horizontal	J5
1	Antenna	TestPoint_THTPad_1.5x1.5mm_Drill0.7mm	AE1
2	C115357 SW_Push	SW_Push_SPST_NO_Alps_SKRK	SW1, SW7
5	C455109 SW_Push	SW_Push_1P1T_NO_6x6mm_H9.5mm	SW2, SW3, SW4, SW5, SW6
3	C19189746 LED	LED_0603_1608Metric	D1, D2, D3
2	27NH 27nH	L_0402_1005Metric	L1, L2
1	22N 22n	L_0402_1005Metric	L3
1	27N 27n	L_0402_1005Metric	L4

Show 15 more

Qty	Part	Footprint	Refs
4	1u	C_0603_1608Metric	C1, C5, C7, C11
2	15P 15p	C_0603_1608Metric	C2, C3
6	100N 100n	C_0603_1608Metric	C4, C6, C8, C9, C10, C12
2	3.9P 3.9p	C_0402_1005Metric	C13, C21
2	220P 220p	C_0402_1005Metric	C14, C17
1	8.2P 8.2p	C_0402_1005Metric	C15
1	5.6P 5.6p	C_0402_1005Metric	C16
1	100N C_Small	C_0402_1005Metric	C18
2	27P 27p	C_0402_1005Metric	C19, C20
2	1k	R_0603_1608Metric	R1, R6
2	10K 10k	R_0603_1608Metric	R2, R5
2	27	R_0603_1608Metric	R3, R4
14	4K7 4k7	R_0603_1608Metric	R7, R8, R9, R10, R11, R12, R13, R14 +6
8	0	R_0603_1608Metric	R16, R17, R18, R19, R23, R24, R25, R26
1	56K 56k	R_0402_1005Metric	R21

Hackbat design files

The KiCad project lives in the controlpaths/hackbat repository on GitHub; these links point at the commit this page was built from.

Layoutkicad/hackbat/hackbat.kicad_pcb
Schematickicad/hackbat/hackbat.kicad_sch
BOMkicad/hackbat/production_files/bom.csv

Hackbat: common questions

What microcontroller does the Hackbat use?

The Hackbat is built around the C2040, from the RP2040/RP2350 family.

How big is the Hackbat PCB?

The Hackbat measures 100 × 42 mm, has 4 copper layers and is 1.6 mm thick.

How many components are on the Hackbat?

78 components, from 35 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Hackbat design files?

From the controlpaths/hackbat repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Hackbat design in my own project?

Yes, under the terms of its CC0-1.0 license, which controlpaths chose for the repository.

Can I test firmware for the Hackbat without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.