38 open source boards using the DM-OLED096-636

Real designs built with the DM-OLED096-636, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

38 boardsClear filters|Most starred

How designs wire the DM-OLED096-636

Read from the KiCad layouts of 34 open source designs, one per repository: what each pin of the DM-OLED096-636 connects to, and the resistors, capacitors and other passives placed on it.

  • The SDA pin has a pull-up to 3.3V on 17 of 34 designs, most often 4.7 kΩ (then 10 kΩ).
  • The SCL pin has a pull-up to 3.3V on 16 of 34 designs, most often 4.7 kΩ (then 10 kΩ).
  • Pin S1 is left unconnected on 18 of 18 designs.
  • Pin S2 is left unconnected on 18 of 18 designs.
GNDpin 1Connected to: GND 79%
VCC_INpin 2Connected to: 3.3V 74% · a signal 21%
SCLpin 3Connected to: The microcontroller 68%
  • Pull-up to 3.3V on 47% · 4.7 kΩ (13), 10 kΩ (1)
SDApin 4Connected to: The microcontroller 68%
  • Pull-up to 3.3V on 50% · 4.7 kΩ (14), 10 kΩ (1)
Pin S1Connected to: Not connected 100%
Pin S2Connected to: Not connected 100%
Pin S3Connected to: Not connected 100%
Pin S4Connected to: Not connected 100%

Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Hackbat by controlpaths, AppleIIDiskIIStm32F411 by vibr77, Hackbat esp32 by thehackbat and SAP-Plus Loader / Debugger by TomNisbet.

The DM-OLED096-636 in open source designs

The gallery holds 38 open source boards using the DM-OLED096-636 from 36 GitHub repositories; a typical one measures about 86.4 × 66.5 mm and carries around 29 components.

81% are two-layer designs, the rest use four layers or more, and 32% carry an open source license.

The most starred is Hackbat by controlpaths.

Microcontrollers on boards using the DM-OLED096-636

DM-OLED096-636: common questions

Where can I find a DM-OLED096-636 reference design?

Each of the 38 boards on this page is a real design using the DM-OLED096-636. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What pull-up resistor is used on the DM-OLED096-636 SDA pin?

The SDA pin has a pull-up to 3.3V on 17 of 34 designs, most often 4.7 kΩ (then 10 kΩ). Counted from the KiCad layouts of 34 open source designs using the DM-OLED096-636.

What pull-up resistor is used on the DM-OLED096-636 SCL pin?

The SCL pin has a pull-up to 3.3V on 16 of 34 designs, most often 4.7 kΩ (then 10 kΩ). Counted from the KiCad layouts of 34 open source designs using the DM-OLED096-636.

How is the DM-OLED096-636 pin S1 connected?

Pin S1 is left unconnected on 18 of 18 designs. Counted from the KiCad layouts of 34 open source designs using the DM-OLED096-636.

What parts are used alongside the DM-OLED096-636?

The XIAO-RP2040-DIP, AMS1117-3.3, C29953, ESP32-CAM and ESP32-S3-WROOM-1 appear in the most repositories here.

Which microcontrollers do boards using the DM-OLED096-636 use?

Most are built on ESP32 (15), RP2040/RP2350 (10), AVR/Arduino (4) and Nordic nRF (1).

How big is a typical board using the DM-OLED096-636?

The median is 86.4 × 66.5 mm, and 81% are two-layer designs.

What is the most popular open source board using the DM-OLED096-636?

By GitHub stars, Hackbat by controlpaths, with 1,006 stars.

Can I simulate one of these boards using the DM-OLED096-636 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part