2 open source boards using the C29953
Real designs built with the C29953, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
RP2040/RP2350Hackbat
controlpaths
100 × 42 mm78 parts4LCC0-1.01.0k
ESP32Hackbat esp32
thehackbat
100 × 40 mm59 parts2LNo license12
The C29953 in open source designs
The gallery holds 2 open source boards using the C29953 from 2 GitHub repositories; a typical one measures about 100 × 41 mm and carries around 69 components.
50% are two-layer designs, the rest use four layers or more, and 50% carry an open source license.
The most starred is Hackbat by controlpaths.
Parts used alongside the C29953
Microcontrollers on boards using the C29953
What boards using the C29953 are built for
C29953: common questions
Where can I find a C29953 reference design?
Each of the 2 boards on this page is a real design using the C29953. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the C29953 use?
Most are built on ESP32 (1) and RP2040/RP2350 (1).
How big is a typical board using the C29953?
The median is 100 × 41 mm, and 50% are two-layer designs.
What is the most popular open source board using the C29953?
By GitHub stars, Hackbat by controlpaths, with 1,001 stars.
Can I simulate one of these boards using the C29953 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.