3 open source boards using the C2940197
Real designs built with the C2940197, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
RP2040/RP2350
Hackbat
controlpaths
100 × 42 mm78 parts4LCC0-1.01.0kRP2040/RP2350
Rp2350b launchpad
Terstegge
58.4 × 83.8 mm122 parts2LNo license5RP2040/RP2350
Hackbat
yelrambob
100 × 42 mm78 parts4LCC0-1.00
The C2940197 in open source designs
The gallery holds 3 open source boards using the C2940197 from 3 GitHub repositories; a typical one measures about 100 × 42 mm and carries around 78 components.
67% use four copper layers or more, and 67% carry an open source license.
The most starred is Hackbat by controlpaths.
Parts used alongside the C2940197
Microcontrollers on boards using the C2940197
What boards using the C2940197 are built for
C2940197: common questions
Where can I find a C2940197 reference design?
Each of the 3 boards on this page is a real design using the C2940197. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What parts are used alongside the C2940197?
The C2040, AMS1117-3.3, C29953, C784365 and DM-OLED096-636 appear in the most repositories here.
Which microcontrollers do boards using the C2940197 use?
Most are built on RP2040/RP2350 (3).
How big is a typical board using the C2940197?
The median is 100 × 42 mm, and 33% are two-layer designs.
What is the most popular open source board using the C2940197?
By GitHub stars, Hackbat by controlpaths, with 1,006 stars.
Can I simulate one of these boards using the C2940197 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.